datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

P/N + Descripción + Búsqueda de contenido

Consulta
Número de pieza(s) : AM55-0024TR-3000
MACOM
Tyco Electronics
componentes Descripción : High Dynamic Range, 2 Channel IF Amplifier with Power Control 100 - 400 MHz

Description
The M/A-COM AM55-0024 is a dual Channel IF Amplifier and digital attenuator packaged in a multi-layer multi-chip module (MCM). Gain Control is via two separate serial logic interfaces. The part utilizes Plastic Ball Grid Array (PBGA) interconnect technology to achieve High circuit density and superior performance. This device is ideal for GSM/DCS/PCS digital base station applications where High Dynamic range gain Control functionality is required.

Features
• Attenuation: 0.5 dB steps to 31.5 dB
• 6 Bit Digital Gain Control
• CMOS Logic
• Serial Logic Interface
• Single Positive Voltage Supply
• 8 mm PBGA Package
• JEDEC MO-151 Footprint
• Single Package Solution for GSM,CDMA,PCS

MACOM
Tyco Electronics
componentes Descripción : Hi Dyn Range 2 Channel IF Amp with Power Control, 100 - 400 MHz

Description
The M/A-COM AM55-0024 is a dual Channel IF Amplifier and digital attenuator packaged in a multi-layer multi-chip module (MCM). Gain Control is via two separate serial logic interfaces. The part utilizes Plastic Ball Grid Array (PBGA) interconnect technology to achieve High circuit density and superior performance. This device is ideal for GSM/DCS/PCS digital base station applications where High Dynamic range gain Control functionality is required.

Features
■ Attenuation: 0.5 dB steps to 31.5 dB
■ 6 Bit Digital Gain Control
■ CMOS Logic
■ Serial Logic Interface
■ Single Positive Voltage Supply
■ 8 mm PBGA Package
■ JEDEC MO-151 Footprint
■ Single Package Solution for GSM,CDMA,PCS

Número de pieza(s) : AH4
WJ
WJ Communications => Triquint
componentes Descripción : High Dynamic Range Amplifier

Product Description
The AH4 is a High Dynamic range Amplifier packaged in a Land Grid Array (LGA) surface mount package for applications thru 6 GHz. The combination of low noise figure and High output IP3 at the same bias point makes it ideal for receiver and transmitter applications. The AH4 achieves +41 dBm OIP3 at a mounting temperature of 80˚C with an associated MTBF of >100 years4. The package is a 3 X 3 Land Grid Array. All devices are 100% RF and DC tested. The product is targeted for applications in the W-LAN and UNII bands where High linearity is required.

Product Features
• 250-6000 MHz
• +41 dBm Output IP3
• 2.7 dB Noise Figure
• 13.5 dB Gain
• +21 dBm P1dB
• MTBF >100 Years
• 3 X 3 LGA SMT Package
• Single +5 Bias Supply

Número de pieza(s) : AH31-RFID
WJCI
WJ Communications => Triquint
componentes Descripción : High Dynamic Range IF Amplifier

Product Description
The AH31 is a High Dynamic range Amplifier in a low-cost surface-mount package. Its robustness and ease of use make it an ideal candidate for the core of any RFID reader application. It is compliant with EPC and ISO standards. The combination of low noise figure, High gain, and High output IP3 is ideal as an IF Amplifier for receiver and transmitter applications. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 100 years at mounting temp eratures of +85°C and is housed in a SOT-89 industry-standard SMT package.
The broadband MMIC Amplifier can be directly applied to various current and next generation RFID technologies such as EPC, ISO, ETSI, and ANSI. Their small size makes them ideal for PCMCIA applications.

Product Features
· 50 – 1000 MHz
· ISO & EPC compliant
· 19 dB Gain
· +22 dBm P1dB
· +42 dBm OIP3
· 1.8 dB Noise Figure
· Single Voltage Supply (+5 V)
· MTTF > 100 years
· SOT-89 SMT Package

Applications
· RFID: HF, UHF, microwave
· Readers
   · Industrial
   · Portable
   · Handheld

 

Número de pieza(s) : CMM6003-SC-BD
MIMIX
Mimix Broadband
componentes Descripción : High Dynamic Range Amplifier

Description
The CMM6003-SC is a High Dynamic range Amplifier designed for applications operating within the 50 MHz to 870 MHz frequency range. It is an ideal solution for transmit and receive functions where High linearity is required.
The Amplifier has the flexibility of being optimized for a number of wireless applications. The combination of gain flatness, bandwidth, low NF and High IP3 at the same bias point make it an ideal transmit or receive solution when used in intermediate frequency applications.

Features
➤ 50 to 870 MHz Frequency Range
➤ +41 dBm Output IP3
➤ 1.6 dB Noise Figure (@ 450 MHz)
➤ 17 dB Gain
➤ 22 dBm P1dB
➤ SOT-89 SMT Package
➤ Single Power Supply
➤ +3V to +5V Voltage Rail

Número de pieza(s) : AH31 AH31-G AH31-PCB75
TriQuint
TriQuint Semiconductor
componentes Descripción : High Dynamic Range IF Amplifier
The AH31 is a High Dynamic range Amplifier in a lowcost surface-mount package. The combination of low noise figure, High gain, and High output IP3 is ideal as an IF Amplifier for receiver and transmitter applications
Número de pieza(s) : AM500004V6
MACOM
Tyco Electronics
componentes Descripción : High Dynamic Range Low Noise Amplifier 1400 - 2000 MHz

Description
M/A-COM’s AM50-0004 is a High Dynamic Range, GaAs MMIC, low noise Amplifier in a low cost, SOIC 8-lead, surface mount, plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM50-0004 also features flexible biasing to Control the current consumption vs. Dynamic range trade-off. The AM50-0004 can operate from any positive supply voltage in the 3 V to 8 V range. Its current can be Controlled over a range of 20 mA to 60 mA with an external resistor.

Features
• Low Noise Figure: 1.4 dB
High Input IP3: +18 dBm at 8 V, 45 mA bias
                           +8 dBm at 3 V, 20 mA bias
High Gain: 14 dB
• Single Supply: +3 to +8 VDC
• Low Cost SOIC-8 Plastic Package
• Adjustable current: 20 to 60 mA with external resistor

Número de pieza(s) : AM500004V3
MACOM
Tyco Electronics
componentes Descripción : High Dynamic Range Low Noise Amplifier 1400 - 2000 MHz

Description
M/A-COM’s AM50-0004 is a High Dynamic Range, GaAs MMIC, low noise Amplifier in a low cost, SOIC 8-lead, surface mount, plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM50-0004 also features flexible biasing to Control the current consumption vs. Dynamic range trade-off. The AM50-0004 can operate from any positive supply voltage in the 3 V to 8 V range. Its current can be Controlled over a range of 20 mA to 60 mA with an external resistor.

Features
• Low Noise Figure: 1.4 dB
High Input IP3: +18 dBm at 8 V, 45 mA bias
                           +8 dBm at 3 V, 20 mA bias
High Gain: 14 dB
• Single Supply: +3 to +8 VDC
• Low Cost SOIC-8 Plastic Package
• Adjustable current: 20 to 60 mA with external resistor

Número de pieza(s) : AM50-0003V4
MACOM
Tyco Electronics
componentes Descripción : High Dynamic Range Low Noise Amplifier 800 - 1000 MHz

Description
M/A-COM’s AM50-0003 is a High Dynamic Range, GaAs MMIC, low noise Amplifier in a low cost, SOIC 8-Lead, surface mount, plastic package. It employs e x t e r n a l i n p u t m a t c h i n g t o o b t a in optimum noise figure performance and operating frequency flexibility. The AM50-0003 also features flexible biasing to Control the current consumption vs. Dynamic range trade-off. The AM50-0003 can operate from any supply voltage in the 3V to 8V range. Its current can be Controlled over a range of 20 mA to 80 mA with an external resistor.

Features
• Low Noise Figure: 1.2 dB
High Input: +18 dBm at 8 V, 60 mA bias +6.5 dBm at 3 V, 20 mA bias
High Gain: 15 dB
• Single Supply: +3 to +8 VDC
• Low Cost SOIC-8 Plastic Package
• Adjustable current: 20 to 80 mA with external resistor

Número de pieza(s) : AH1 AH1-PCB
WJ
WJ Communications => Triquint
componentes Descripción : High Dynamic Range Amplifier

Product Description
The AH1 is a High Dynamic range Amplifier packaged in a low cost SOT-89 surface mount package. The combination of low noise figure and High output IP3 at the same bias point makes it ideal for receiver and transmitter applications. The AH1 achieves +41 dBm OIP3 at a mounting temperature of 85˚C with an associated MTBF of >100 years5. All devices are 100% RF and DC tested.
The product is targeted for applications where High linearity is required.

Product Features
• 250-3000 MHz
• +41 dBm Output IP3
• 2.7 dB Noise Figure
• 13.5 dB Gain
• +21 dBm P1dB
• MTBF >100 Years
• SOT-89 SMT Package
• Single +5 V Supply

12345678910 Next

All Rights Reserved© datasheetbank.com [ Política De Privacidad ]