datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  MaximIC  >>> MAX3946_10 PDF

MAX3946_10 Datasheet PDF - Maxim Integrated

Número de pieza
componentes Descripción
Fabricante
Other PDF
  no available.
PDF
MAX3946_10 Datasheet PDF : MAX3946_10 pdf     
MAX3946_10 image

General Description
The MAX3946 is a +3.3V, multirate, low-power laser diode driver designed for Ethernet and Fibre Channel transmission systems at data rates up to 11.3Gbps. This device is optimized to drive a differential transmitter optical subassembly (TOSA) with a 25I flex circuit. The unique design of the output stage enables use of unmatched TOSAs, greatly reducing headroom limitations and lowering power consumption.
The device receives differential CML-compatible signals with on-chip line termination. It can deliver laser modulation current of up to 80mA, at an edge speed of 22ps (20% to 80%), into a 5I to 25I external differential load. The device is designed to have a symmetrical output stage with on-chip back terminations integrated into its outputs. A high-bandwidth, fully differential signal path is implemented to minimize deterministic jitter. An equalization block can be activated to compensate for the SFP+ connector. The integrated bias circuit provides programmable laser bias current up to 80mA. Both the laser bias generator and the laser modulator can be disabled from a single pin.
A 3-wire digital interface reduces the pin count and permits adjustment of input equalization, pulse-width adjustment, Tx polarity, Tx deemphasis, modulation current, and bias current without the need for external components. The MAX3946 is available in a 4mm x 4mm, 24-pin TQFN package.

Features
♦ 225mW Power Dissipation Enables < 1W SFP+ Modules
♦ Up to 100mW Power Consumption Reduction by Enabling the Use of Unmatched FP/DFB TOSAs
♦ Supports SFF-8431 SFP+ MSA and SFF-8472 Digital Diagnostic
♦ 225mW Power Dissipation at 3.3V (IMOD = 40mA, IBIAS = 60mA Assuming 25I TOSA)
♦ Single +3.3V Power Supply
♦ Up to 11.3Gbps (NRZ) Operation
♦ Programmable Modulation Current from 10mA to 100mA (5Ω Load)
♦ Programmable Bias Current from 5mA to 80mA
♦ Programmable Input Equalization
♦ Programmable Output Deemphasis
♦ 25Ω Output Back Termination at TOUT+ and TOUT
♦ DJ Performance 7psP-P with Mismatched Differential Load (5Ω)
♦ DJ Performance 5psP-P with Mismatched Differential Load (25Ω)
♦ DJ Performance 5psP-P with 50Ω Differential Load
♦ Programmable Pulse Width
♦ Edge Transition Times of 22ps
♦ Bias Current Monitor
♦ Integrated Eye Safety Features
♦ 3-Wire Digital Interface
♦ -40°C to +95°C Operation

Applications
   4x/8x FC SFP+ Optical Transceivers
   10GFC SFP+ Optical Transceivers
   10GBASE-LR SFP+ Optical Transceivers
   10GBASE-LRM SFP+ Optical Transceivers
   OC192-SR XFP/SFP+ SDH/SONET Transceivers

Page Link's: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28 
 

Número de pieza
componentes Descripción
PDF
Fabricante
1.3 µm D2300-Type Laser Isolated DFB Laser Module
Ver
Micro Electronics
1.3 µm D2300-Type Laser Isolated DFB Laser Module
Ver
Agere -> LSI Corporation
SFP Laser Controller and Diagnostic IC
Ver
Dallas Semiconductor -> Maxim Integrated
Laser Diode on Submount 1.0 W cw (Class 4 Laser Product)
Ver
Infineon Technologies
Laser Diode on Submount 1.0 W cw (Class 4 Laser Product)
Ver
Siemens AG
Up to 11.3 Gb/s 3.3V: VCSEL, DML, EML Laser/Modulator Driver Family
Ver
Vitesse Semiconductor
Laser Diode in TO-220 Package 1.0 W cw (Class 4 Laser Product)
Ver
Siemens AG
1-Ch Laser Diode Driver + Oscillator
Ver
Elantec -> Intersil
1-Ch Laser Diode Driver + Oscillator
Ver
Elantec -> Intersil
MITSUBISHI LASER DIODES 1310nm InGaAsP FP LASER DIODES
Ver
Mitsumi

Share Link : 

English 한국어 简体中文 日本語 русский

All Rights Reserved© datasheetbank.com [ Política De Privacidad ]