AFBR-5803AQZ and AFBR-5803ATQZ
FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers
in Low Cost 1 x 9 Package Style
Data Sheet
Description
The AFBR-5800Z family of transceivers from Avago Tech-
nologies provide the system designer with products
to implement a range of Fast Ethernet, FDDI and ATM
(Asynchronous Transfer Mode) designs at the 100 Mb/s-
125 MBd rate.
The transceivers are all supplied in the industry standard
1 x 9 SIP package style with either a duplex SC or a duplex
ST* connector interface.
FDDI PMD, ATM and Fast Ethernet 2 km Backbone Links
The AFBR-5803AQZ/ATQZ are 1300 nm products with
optical performance compliant with the FDDI PMD
standard. The FDDI PMD standard is ISO/IEC 9314‑3: 1990
and ANSI X3.166 - 1990.
These transceivers for 2 km multimode fiber backbones
are supplied in the small 1 x 9 duplex SC or ST package
style.
The AFBR-5803AQZ/ATQZ is useful for both ATM 100
Mb/s interfaces and Fast Ethernet 100 Base-FX inter-
faces. The ATM Forum User-Network Interface (UNI)
Standard, Version 3.0, defines the Physical Layer for 100
Mb/s Multimode Fiber Interface for ATM in Section 2.3 to
be the FDDI PMD Standard. Likewise, the Fast Ethernet
Alliance defines the Physical Layer for 100 Base-FX for
Fast Ethernet to be the FDDI PMD Standard.
ATM applications for physical layers other than 100 Mb/s
Multimode Fiber Interface are supported by Avago Tech-
nologies. Products are available for both the single mode
and the multimode fiber SONET OC-3c (STS‑3c) ATM in-
terfaces and the 155 Mb/s-194 MBd multimode fiber ATM
interface as specified in the ATM Forum UNI.
Contact your Avago Technologies sales representative
for information on these alternative Fast Ethernet, FDDI
and ATM products.
Features
• Full compliance with the optical performance re-
quirements of the FDDI PMD standard
• Full compliance with the FDDI LCF-PMD standard
• Full compliance with the optical performance re-
quirements of the ATM 100 Mb/s physical layer
• Full compliance with the optical performance re-
quirements of 100 Base‑FX version of IEEE 802.3u
• Multisourced 1 x 9 package style with choice of
duplex SC or duplex ST* receptacle
• Wave solder and aqueous wash process compatible
• Single +3.3 V or +5 V power supply
• RoHS Compliance
• Industrial range -40 to 85C
Applications
• Multimode fiber backbone links
• Multimode fiber wiring closet to desktop links
• Very low cost multimode fiber links from wiring
closet to desktop
• Multimode fiber media converters
*ST is a registered trademark of AT&T Lightguide Cable Connectors.