HSP45116A Ver la hoja de datos (PDF) - Intersil
Número de pieza
componentes Descripción
Lista de partido
HSP45116A Datasheet PDF : 16 Pages
| |||
HSP45116
Absolute Maximum Ratings
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6.0V
Input, Output or I/O Voltage Applied . . . . . GND -0.5V to VCC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Operating Voltage Range . . . . . . . . . . . . . . . . . . . +4.75V to +5.25V
Operating Temperature Range . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (°C/W)
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22.0
Maximum Junction Temperature
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
(MQFP - Lead Tips Only)
Die Characteristics
Component Count . . . . . . . . . . . . . . . . . . . . . . . 103,000 Transistors
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
DC Electrical Specifications
PARAMETER
Logical One Input Voltage
Logical Zero Input Voltage
High Level Clock Input
Low Level Clock Input
Output HIGH Voltage
Output LOW Voltage
Input Leakage Current
I/O Leakage Current
Standby Power Supply Current
Operating Power Supply Current
SYMBOL
VIH
VIL
VIHC
VILC
VOH
VOL
II
IO
ICCSB
ICCOP
TEST CONDITIONS
VCC = 5.25V
VCC = 4.75V
VCC = 5.25V
VCC = 4.75V
IOH = -400mA, VCC = 4.75V
IOL = 2.0mA, VCC = 4.75V
VIN = VCC or GND, VCC = 5.25V
VOUT = VCC or GND, VCC = 5.25V
VIN = VCC or GND VCC = 5.25V, Note 4
f = 15MHz, VIN = VCC or GND, VCC = 5.25V,
Notes 2 and 4
MIN
MAX UNITS
2.0
-
V
-
0.8
V
3.0
-
V
-
0.8
V
2.6
-
V
-
0.4
V
-10
10
µA
-10
10
µA
-
500
µA
-
182
mA
Capacitance TA = 25°C, Note 3
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
Input Capacitance
Output Capacitance
CIN
FREQ = 1MHz, VCC = Open, All measurements
-
are referenced to device ground
CO
-
NOTES:
2. Power supply current is proportional to operating frequency. Typical rating for ICCOP is 10mA/MHz.
3. Not tested, but characterized at initial design and at major process/design changes.
4. Output load per test load circuit with switch open and CL = 40pF.
MAX
15
15
UNITS
pF
pF
13
Share Link: 