LM7MS623 Ver la hoja de datos (PDF) - Sharp Electronics

Número de pieza

componentes Descripción

Lista de partido

LM7MS623

DEVICE SPECIFICATION for Passive Matrix Monochrome LCD Module (640X240 dots)

Sharp Electronics 

SHARP

SPEC No.

LC99404

MODEL No.

LM7MS623

PAGE

3

12) Do not use touch TCP/LCD connection area to prevent interconnection breakdown.

13) Do not apply organic solvent to TWLCD connection area where organic materials are used.

14) This specification describes display quality in caseof no gray scale. Since display quality can be affected by

gray scaIe methods, display quality shall be carefully evaluated for the usability of LCD module in casegray

scale is displayed on the LCD module.

15) The module should be driven according to the specified ratings to avoid permanent damage.

DC voltage drive leads to rapid deterioration of LC, so ensure that the drive is alternating waveform by

continuous application of the signal M. Esneciallv the Dower ON/OFF seauence shown on Pave 22 should be

kent to avoid latch-un of drive LSI and application of DC voltape to LCD Dane1

Share Link: