RF9938 Ver la hoja de datos (PDF) - RF Micro Devices
Número de pieza
componentes Descripción
Lista de partido
RF9938 Datasheet PDF : 4 Pages
| |||
RF9938
Pin Function Description
Interface Schematic
1
IF+
Balanced IF Input Pin. This pin is internally DC biased and should be
DC blocked if connected to a device with a DC level present. For single-
ended input operation, one pin is used as an input and the other IF
input is AC coupled to ground. The balanced, as well as single-ended,
input impedance is 265Ω.
2
IF-
Same as pin 1, except complementary input.
3
GND
Ground connection. Keep traces physically short and connect immedi-
ately to ground plane for best performance.
4
LO+
Balanced LO Input Pin. This pin is internally DC biased and should be
DC blocked if connected to a device with a DC level present. For single-
ended input operation, one pin is used as an input and the other LO
input is AC coupled to ground. The balanced, as well as single-ended,
input impedance is 50Ω.
5
LO-
Same as pin 4, except complementary input.
6
GND
Same as pin 3.
7
VCC
Supply Voltage pin. External bypassing is required. External RF, LO,
and IF bypassing is required. The trace length between the pin and the
bypass capacitors should be minimized. The ground side of the bypass
capacitors should connect immediately to ground plane.
6
8
RF OUT RF Output Pin. This pin is internally DC blocked. The output impedance
is 50Ω.
Application Schematic
IF+
IF-
LO IN
1 nF
1
1 nF
2
3
33 pF
4
8
RF OUT
VCC
7
47 pF
100 nF
6
10 pF
5
Rev A3 010720
6-63
Share Link: 