datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

CH2124 Ver la hoja de datos (PDF) - Cermetek Microelectronics

Número de pieza
componentes Descripción
Lista de partido
CH2124
Cermetek
Cermetek Microelectronics Cermetek
CH2124 Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
HIGH SPEED INTERNET MODEM FAMILY
CH2124
-
CH2156
-
CH2160
-
Send/Retrieve Email. 2 I/O Ports 2400bps.
Send Email Only. 2 I/O Ports, 56kbps.
Send/Retrieve Email. 2 I/O Ports, 56kbps.
FEATURES
Point-to-Point Protocol (PPP)
Password Authentication Protocol (PAP) and
challenge Authentication Protocol (CHAP) to
connect to the Internet.
TCP/IP and Simple Mail Transfer Protocol (SMTP)
to send emails.
TCP/IP and POP3 to retrieve and/or delete emails.
On Demand and event driven email transmission
and retrieval.
Programmable using serial interface or using
PSTN.
Remote programming using PSTN.
Supports V.90, V.34bvis, V.34, V.22bis, V.22A/B
V.23, V.21, Bell 212A and 103.
Supports V.80 Synchronous operation.
Error correcting: V.42 LAPM, MNP 2-4 and
MNP10.
Data Compression: V.42bis and MNP5.
MNP10 Data throughput enhancement for cellular
operation.
DTE serial interface with speeds up to 230.4kbps.
Automatic baud rate adaptability utilizing speed
sensing, flow control and data buffers.
Send & Receive FAX Class 1, Group 3 supported.
Serial V.24, 5 volt interface.
NVRAM directory and stored profiles.
Standard AT Command structure with extensions.
Cermetek @T® AT Command extensions.
Built-in DAA with 1500 VAC RMS isolation 2122V
peak surge protection.
UL 1950 and CSA C22.2 950 (Third Edition)
Listed, Reference UL File E104957.
FCC Part 68 Approved/DOT CSA CS-03 Part I
approvable.
Pin-for-Pin compatible with CH179X and CH2056
HS Family of modems.
+5 Volt operation with zero power option.
Small size: 1.35” x 1.97” x 0.55” (nominal).
Low Cost 2400bps version (CH2124).
Low cost iModem Network ISP providing email to
Voice, Fax, ftp, and email re-routing services.
90 day free trial subscription to iModem Network
ISP provided with each iModem.
INTRODUCTION
Direct machine-to-machine interaction represents the
next logical extension of the internet. Cermetek
internet modem (iModem) products are designed to
exploit the internet to facilitate the utilization of
machine-to-machine interactions. Using email,
information can easily be transferred between systems
and can be transmitted/retrieved at will. Internet email
provides low cost, near real time multi-path
communication.
After initial setup, iModem machine-to-machine
activities proceed transparently with the level of control
desired by the user. This includes fully autonomous
(i.e., no human intervention) operation which takes
advantage of the internal intelligence of the iModem.
Cermetek’s iModem products operate at +5 Volt and
have a zero power option.
OVERVIEW OF THE CH21XX iMODEM
A conceptual representation of the iModem in the
embedded environment is presented in Figure 1. As
can be seen in this figure, the iModem requires the
input of various internet parameters to function
properly: user name, user ID, user password, ISP
telephone number, ISP mail server address, local
email address, destination email address and user
specified email message/input port status. Cermetek’s
iModem products provide the user with the ability to
assign a unique unit name to each iModem thereby
affording the user the opportunity to create a
customized identity for each system containing an
iModem product.
The iModem device stores all user-supplied
parameters in internal memory. These parameters will
not be lost when power is removed. The user supplied
parameters are loaded into the iModem via the
iModem’s RS232 serial interface port and is done
utilizing
either
Cermetek’s
iNetWizard®
telecommunications software package or, alternatively,
one of a variety of commercially available terminal
emulation software packages. iNetWizard® is
provided free of charge by Cermetek and runs on any
standard PC operating in the Microsoft Windows
environment. Cermetek also manufactures a
companion CH21XX Evaluation Board that is designed
to facilitate the hardware connections required to
program the iModem as well as providing a reliable
platform to assist with system level debugging.
2003 Cermetek Microelectronics, Inc.
Page 1
Document No. 607-0017 Revision G1 (06/03)

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]