GNR40S301K Ver la hoja de datos (PDF) - CERAMATE TECHNICAL
Número de pieza
componentes Descripción
Lista de partido
GNR40S301K Datasheet PDF : 6 Pages
| |||
CITATION
SUBJECT
TYPE
GNR10D□□□K
MODEL
ELECTRICAL CHARACTERISTICS
PAGE 3/4
DATE Jul. 21, 2004
REV.
C01
3. ELECTRICAL CHARACTERISTICS
N0.
ITEM
3.0
Standard
Conditions
3.1
Maximum
Allowable Voltage
3.2 Varistor Voltage
Varistor Voltage
3.3 Temperature
Coefficient
3.4
Max. Clamping
Voltage
3.5 Rated Power
3.6
Withstanding
Surge Current
3.7
Energy
3.8
Surge Life
PERFORMANCE
TEST METHODS
Unless otherwise specified, all tests are made
under environmental conditions as given below:
Temperature:
5~35°C
Relative humidity: 45~85 % RH
AC : *(2) Vrms Maximum continuous sine wave(RMS) or DC
DC : *(2) V
voltage which may be applied.
V0.1mA : *(2) V Voltage across the varistor measured at CmA DC.
0 ~ −0.05 %/°C
*(2) V at *(2) A
*(2) W
*(2) A
*(2) Joule
*(2) A
Peak voltage across the varistor with a specified
peak impulse current of 8x20µs waveform.
Maximum 50~60Hz power which may be loaded
for 1,000 hrs at 85±2°C with ∆VCmA/ VCmA ≤±10%.
The max. current within the varistor voltage
change of less than ±10% when one impulse
current (8x20µs) applied.
The max. current with a varistor voltage change
of less than ±10% when two times impulse
current (8x20µs) are applied at intervals of 5
minutes.
The max. energy absorbed with a varistor voltage
change of less than ±10% when one impulse
(10x1000µs) is applied.
The max. current with a varistor voltage change
of less than ±10% when 10,000 times impulse
current (8x20µs) are applied at intervals of 20
seconds at room temperature.
*(2) See Page 4
Share Link: 