ADM2485 Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Lista de partido
ADM2485 Datasheet PDF : 20 Pages
| |||
High Speed, Isolated RS-485 Transceiver
with Integrated Transformer Driver
ADM2485
FEATURES
Half-duplex, isolated RS-485 transceiver
Integrated oscillator driver for external transformer
PROFIBUS® compliant
Complies with ANSI/TIA/EIA RS-485-A-98 and
ISO 8482:1987(E)
Data rate: 16 Mbps
5 V or 3.3 V operation (VDD1)
50 nodes on bus
High common-mode transient immunity: >25 kV/μs
Isolated DE OUT status output
Thermal shutdown protection
Safety and regulatory approvals
UL recognition: 2500 V rms for 1 minute per UL 1577
VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
Reinforced insulation, VIORM = 560 V peak
Operating temperature range: –40°C to +85°C
Wide-body, 16-lead SOIC package
APPLICATIONS
Isolated RS-485/RS-422 interfaces
PROFIBUS networks
Industrial field networks
Multipoint data transmission systems
GENERAL DESCRIPTION
The ADM2485 differential bus transceiver is an integrated,
galvanically isolated component designed for bidirectional data
communication on multipoint bus transmission lines. It is
designed for balanced transmission lines and complies with
ANSI/TIA/EIA RS-485-A-98 and ISO 8482:1987(E).
The device employs Analog Devices, Inc., iCoupler® technology
to combine a 3-channel isolator, a three-state differential line
driver, and a differential input receiver into a single package. An
on-chip oscillator outputs a pair of square waveforms that drive
an external transformer to provide isolated power with an external
transformer. The logic side of the device can be powered with
either a 5 V or a 3.3 V supply, and the bus side is powered with
an isolated 5 V supply.
FUNCTIONAL BLOCK DIAGRAM
VDD1 D1 D2
VDD2
RTS
OSC
ADM2485
DE OUT
TxD
A
RxD
B
RE
GND1
GND2
Figure 1.
The ADM2485 driver has an active high enable. The driver
differential outputs and the receiver differential inputs are
connected internally to form a differential input/output port
that imposes minimal loading on the bus when the driver is
disabled or when VDD1 or VDD2 = 0 V. Also provided is an active
high receiver disable that causes the receive output to enter a
high impedance state.
The device has current-limiting and thermal shutdown features
to protect against output short circuits and situations where bus
contention might cause excessive power dissipation. The part is
fully specified over the industrial temperature range and is available
in a 16-lead, wide-body SOIC package.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.
Share Link: 