LD1117
SERIES
LOW DROP FIXED AND ADJUSTABLE
POSITIVE VOLTAGE REGULATORS
I LOW DROPOUT VOLTAGE (1V TYP.)
I 2.85V DEVICE PERFORMANCES ARE
SUITABLE FOR SCSI-2 ACTIVE
TERMINATION
I OUTPUT CURRENT UP TO 800 mA
I FIXED OUTPUT VOLTAGE OF: 1.2V, 1.8V,
2.5V, 2.85V, 3.0V, 3.3V, 5.0V
I ADJUSTABLE VERSION AVAILABILITY
(Vrel=1.25V)
I INTERNAL CURRENT AND THERMAL LIMIT
I AVAILABLE IN ± 1% (AT 25°C) AND 2% IN
FULL TEMPERATURE RANGE
I SUPPLY VOLTAGE REJECTION: 75dB (TYP.)
DESCRIPTION
The LD1117 is a LOW DROP Voltage Regulator
able to provide up to 800mA of Output Current,
available even in adjustable version (Vref=1.25V).
Concerning fixed versions, are offered the
following Output Voltages: 1.2V,1.8V,2.5V,2.85V,
3.0V 3.3V and 5.0V. The 2.85V type is ideal for
SCSI-2 lines active termination. The device is
supplied in: SOT-223, DPAK, SO-8 and TO-220.
The SOT-223 and DPAK surface mount packages
optimize the thermal characteristics even offering
a relevant space saving effect. High efficiency is
assured by NPN pass transistor. In fact in this
Figure 1: Block Diagram
TO-220
DPAK
SOT-223
SO-8
case, unlike than PNP one, the Quiescent Current
flows mostly into the load. Only a very common
10µF minimum capacitor is needed for stability.
On chip trimming allows the regulator to reach a
very tight output voltage tolerance, within ± 1% at
25°C. The ADJUSTABLE LD1117 is pin to pin
compatible with the other standard. Adjustable
voltage regulators maintaining the better
performances in terms of Drop and Tolerance.
December 2005
Rev. 19
1/27