DHR500C5(2006) Ver la hoja de datos (PDF) - LEM Industrial

Número de pieza

componentes Descripción

Lista de partido

DHR500C5
(Rev.:2006)

AC/DC Current transducer

LEM Industrial 

Dimensions DHR-C5 (in mm. 1 mm = 0.0394 inch)

25

70

60

2 2.2 8

6 .80

90

4

15

7

6

78

Connections

• Wires up to 2 mm ∅

•DFHeRm-aCle5/c1o0nnector provided (screw terminals)

DHR

24 VDC Power

(+)

(-)

Output Connector

1(Vcc) 2(NC) 3(Vout) 4(GND)

10k

(-)

(+)

Load

(Controller, meter etc)

+24VDC

Is

OUT

Ip

GND

Mechanical characteristics

• General tolerance

±1 mm

• Primary aperture

∅ 32.0 mm

• Panel mounting

4 holes ∅ 4.6 mm

• Distance between holes

70.0 mm & 78 mm

(see above dimensions)

For panel mounting, replace M4 screws by new one (not supplied)

with appropriate length to panel´s thickness.

Remarks

• VOUT is positive when IP flows in the direction of the arrow.

• The return busbar and primary conductor elbow must be located

at least at 2.5 x window length more far away from the transducer

case.

• The temperature of the primary busbar can not exceed 90 °C.

• Dynamic performances are the best with a primary busbar

completely filling the primary aperture.

• This is a standard model. For different versions (supply voltages,

different outputs, bidirectional measurements...), please

contact us.

061128/14

LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.

Page 3/3

www.lem.com

Share Link: