GP1A50HRJ00F Ver la hoja de datos (PDF) - Sharp Electronics

Número de pieza

componentes Descripción

Lista de partido

GP1A50HRJ00F

Gap : 3mm, Slit : 0.5mm *OPIC Output Case package Transmissive Photointerrupter

Sharp Electronics 

■ Manufacturing Guidelines

● Soldering Method

Flow Soldering:

Soldering should be completed below 260˚C and within 5 s.

Please take care not to let any external force exert on lead pins.

Please don't do soldering with preheating, and please don't do soldering by reflow.

GP1A50HRJ00F

Hand soldering

Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C.

Please solder within one time.

Please don't touch the terminals directly by soldering iron.

Soldered product shall treat at normal temperature.

Other notice

Please test the soldering method in actual condition and make sure the soldering works fine, since the

impact on the junction between the device and PCB varies depending on the cooling and soldering

conditions.

Flux

Some flux, which is used in soldering, may crack the package due to synergistic effect of alcohol in flux and

the rise in temperature by heat in soldering. Therefore, in using flux, please make sure that it does not have

any influence on appearance and reliability of the photointerrupter.

Sheet No.: D3-A03501EN

9

Share Link: