MAX2039ETP-T Ver la hoja de datos (PDF) - Maxim Integrated

Número de pieza

componentes Descripción

Lista de partido

MAX2039ETP-T

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

Maxim Integrated 

19-3468; Rev 0; 10/04

EVALUATION KIT

AVAILABLE

High-Linearity, 1700MHz to 2200MHz Upconversion/

Downconversion Mixer with LO Buffer/Switch

General Description

Features

The MAX2039 high-linearity passive upconverter or

downconverter mixer is designed to provide 7.3dB NF

and a 7.1dB conversion loss for an RF frequency range

of 1700MHz to 2200MHz to support UMTS/WCDMA,

DCS, and PCS base-station transmitter or receiver

applications. The IIP3 is typically +34.5dBm and

+33.5dBm for downconversion and upconversion oper-

ation, respectively. With an LO frequency range of

1500MHz to 2000MHz, this particular mixer is ideal for

low-side LO injection architectures. (For a pin-to-pin-

compatible mixer meant for high-side LO injection, con-

tact the factory.)

♦ 1700MHz to 2200MHz RF Frequency Range

♦ 1500MHz to 2000MHz LO Frequency Range

♦ 1900MHz to 2400MHz LO Frequency Range

(Contact Factory)

♦ DC to 350MHz IF Frequency Range

♦ 7.1dB Conversion Loss

♦ +34.5dBm Input IP3 (Downconversion)

♦ +24.4dBm Input 1dB Compression Point

♦ 7.3dB Noise Figure

In addition to offering excellent linearity and noise per-

formance, the MAX2039 also yields a high level of com-

ponent integration. This device includes a

double-balanced passive mixer core, a dual-input LO

selectable switch, and an LO buffer. On-chip baluns

are also integrated to allow for a single-ended RF input

for downconversion (or RF output for upconversion),

and single-ended LO inputs. The MAX2039 requires a

nominal LO drive of 0dBm, and supply current is guar-

anteed to be below 135mA.

The MAX2039 is pin compatible with the MAX2031

815MHz to 995MHz mixer, making this family of passive

upconverters and downconverters ideal for applications

where a common PC board layout is used for both fre-

quency bands.

The MAX2039 is available in a compact 20-pin thin

QFN package (5mm x 5mm) with an exposed paddle.

Electrical performance is guaranteed over the extended

-40°C to +85°C temperature range.

Applications

UMTS/WCDMA Base Stations

♦ Integrated LO Buffer

♦ Integrated RF and LO Baluns

♦ Low -3dBm to +3dBm LO Drive

♦ Built-In SPDT LO Switch with 45dB LO1 to LO2

Isolation and 50ns Switching Time

♦ Pin Compatible with the MAX2031 815MHz to

995MHz Mixer

♦ External Current-Setting Resistor Provides Option

for Operating Mixer in Reduced-Power/Reduced-

Performance Mode

♦ Lead-Free Package Available

Ordering Information

PART

MAX2039ETP

TEMP RANGE PIN-PACKAGE

PKG

CODE

20 Thin QFN-EP*

-40°C to +85°C (5mm x 5mm) T2055-3

bulk

DCS1800/PCS1900 EDGE Base Stations

cdmaOneTM and cdma2000® Base Stations

PHS/PAS Base Stations

MAX2039ETP-T

20 Thin QFN-EP*

-40°C to +85°C (5mm x 5mm) T2055-3

T/R

Predistortion Receivers

20 Thin QFN-EP*

Fixed Broadband Wireless Access

Wireless Local Loop

MAX2039ETP+D -40°C to +85°C (5mm x 5mm)

lead-free

bulk

T2055-3

Private Mobile Radio

Military Systems

Microwave Links

20 Thin QFN-EP*

MAX2039ETP+TD

-40°C to +85°C

(5mm x 5mm)

lead-free

T2055-3

Digital and Spread-Spectrum Communication

T/R

Systems

* EP = Exposed paddle.

cdmaOne is a trademark of CDMA Development Group.

+ = Lead free.

D = Dry pack.

cdma2000 is a registered trademark of Telecommunications

Industry Association.

Pin Configuration and Typical Application Circuit appear at

end of data sheet.

________________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Share Link: