PI3CH360 Ver la hoja de datos (PDF) - Pericom Semiconductor Corporation

Número de pieza

componentes Descripción

Lista de partido

PI3CH360

Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch™

Pericom Semiconductor Corporation 

PI3CH360

Low Voltage, High-Bandwidth, 3-Channel, 2:1

Mux/DeMux, NanoSwitch™

DC Electrical Characteristics, 2.5V Supply (Over Operating Range, TA = –40°C to +85°C, VCC = 2.5V ± 10%)

Parameters

Description

Test Conditions(1)

Min. Typ.(2) Max.

Units

VIH

VIL

VIK

IIH

IIL

IOZH

RON

Input HIGH Voltage

Inout LOW Voltage

Clamp Diode Voltage

Input HIGH Current

Input LOW Current

High Impedance Current(3)

Switch On-Resistance(4)

Guaranteed Logic HIGH Level

Guaranteed Logic LOW Level

VCC = Max., IIN = –6mA

VCC = Max., VIN = VCC

VCC = Max., VIN = GND

0 ≤ Y, In ≤ VCC

VCC = Min., VIN =0.0V,

ION = –48mA

VCC = Min., VIN = 2.25V,

ION = –15mA

1.8

VCC + 0.3

–0.3

0.8

V

–0.7

–1.8

±1

±1

µA

±1

6

8

Ω

7

14

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between Y and In pin at indicated current through the switch. ON resistance is determined

by the lower of the voltages on the two (Y, In) pins

Capacitance (TA = 25°C f = 1 MHz)

Parameters(1)

Description

Test Conditions

CIN

Input Capacitance

COFF(IN)

COFF(Y)

In Capacitance, Switch Off

Y Capacitance, Switch Off

VIN = 0V

CON

Y/In Capacitance, Switch On

Notes:

1. These parameters are determined by device characterization but are not production tested.

Typ.

Units

3.0

3.5

pF

7.0

10.0

Power Supply Characteristics

Parameters

Description

ICC

Quiescent Power Supply Current

Test Conditions(1)

VCC = 3.6V, VIN = GND or VCC

Min. Typ.

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.

Max.

0.8

Units

mA

06-0247

3

PS8727C

05/10/06

Share Link: