PI3CH800QE Ver la hoja de datos (PDF) - Pericom Semiconductor Corporation

Número de pieza

componentes Descripción

Lista de partido

PI3CH800QE

8-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug

Pericom Semiconductor Corporation 

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||

Switch Positions

Test

Switch

tPLZ, tPZL

tPHZ, tPZH

Prop Delay

6.0V

GND

Open

PI3CH800

8-Bit Bus Switch, Enable Low 1.8V/2.5V/

3.3V, High-Bandwidth, Hot Plug

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Test Circuit for Dynamic Electrical Characteristics

Switching Waveforms

Voltage Waveforms Enable and Disable Times

Applications Information

Logic Inputs

The logic control inputs can be driven up to 3.6V regardless of the supply voltage. For example, given a +3.3V supply, EN

may be driven LOW to 0V and HIGH to 3.6V. Driving EN Rail-to-Rail® minimizes power consumption.

Hot Insertion

For Datacom and Telecom applications that have ten or more volts passing through the backplane, a high voltage from the

power supply may be seen at the device input pins during hot insertion. The PI3CH400 devices have maximum limits of 6V

and 120mA for 20ns. If the power is higher or applied for a longer time or repeatedly reaches the maximum limits, the devices

can be damaged.

Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.

2015-07-0020

PT0477-3

08/05/15

5

Share Link: