PI74ALVTC16374AE Ver la hoja de datos (PDF) - Pericom Semiconductor Corporation

Número de pieza

componentes Descripción

Lista de partido

PI74ALVTC16374AE

16-Bit D-Type Flip-Flop with 3-State Outputs

Pericom Semiconductor Corporation 

PI74ALVTC16374

16-Bit D-Type Flip-Flop

with 3-State Outputs 1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Supply Voltage Range, VDD .............................................................. –0.5V to 4.6V

Input Voltage Range, VI ....................................................................... -0.5V to 4.6V

Output Voltage Range, VO(3-Stated) ................................. -0.5Vto4.6V

Output Voltage Range, VO(1)(Active) ....................... –0.5VtoVDD+0.5V

DC Input Diode Current (IIK) VI<0V ............................................ –50mA

DC Output Diode Current (IOK)

VO<0V ....................................................................................... –50mA

VO>VDD ............................................................................................................... ±50mA

DC VDD or GND Current per Supply Pin (IDD or GND) .............. ±100mA

Storage Temperature Range, Tstg .................................... –65°Cto150°C

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the device.

This is a stress rating only and functional operation of the

device at these or any other conditions above those indi-

cated in the operational sections of this specification is not

implied. Exposure to absolute maximum rating conditions

for extended periods may affect reliability.

Notes:

1. Absolute maximum of IO must be observed.

Recommended Operating Conditions(1)

VDD

Supply voltage

VIH

High-level input voltage

VIL

Low-level input voltage

VI

Input voltage

VO

Output voltage

Output current in IOH/IOL

Δt/Δv

TA

Input transistion rise or fall rate(2)

Operating free-air temperature

Operating

Data Retention Only

VDD = 2.7V to 3.6V

VDD = 2.7V to 3.6V

Active State

Off State

VDD = 3.0V to 3.6V

VDD = 2.7V to 3.0V

VDD = 2.3V to 2.7V

VDD = 1.8V

Notes:

1. Unused control inputs must be held HIGH or LOW to prevent them from floating.

2. As measured between 0.8V and 2.0V, VDD=3.0V.

Min.

1.8

1.2

2.0

-0.3

0

0

0

−40

Max.

3.6

3.6

Units

0.8

V

3.6

VDD

3.6

±32/64

±24

±18

mA

±6

10

ns/V

85

C

3

PS8356C 11/06/08

Share Link: