RTL8100B(L)
5.20 Auto-Negotiation Advertisement Register
(Offset 0066h-0067h, R/W)
This register contains the advertised abilities of this device as they will be transmitted to its link partner during Auto-negotiation.
Bit
15
14
13
12-11
10
9
8
7
6
5
4-0
Name
NP
ACK
RF
-
Pause
T4
TXFD
TX
10FD
10
Selector
Description/Usage
Next Page bit.
1 = transmitting the protocol specific data page;
0 = transmitting the primary capability data page
1 = acknowledge reception of link partner capability data word.
1 = advertise remote fault detection capability;
0 = do not advertise remote fault detection capability.
Reserved
1 = flow control is supported by local node.
0 = flow control is not supported by local mode.
1 = 100Base-T4 is supported by local node;
0 = 100Base-T4 not supported by local node.
1 = 100Base-TX full duplex is supported by local node;
0 = 100Base-TX full duplex not supported by local node.
1 = 100Base-TX is supported by local node;
0 = 100Base-TX not supported by local node.
1 = 10Base-T full duplex supported by local node;
0 = 10Base-T full duplex not supported by local node.
1 = 10Base-T is supported by local node;
0 = 10Base-T not supported by local node.
Binary encoded selector supported by this node. Currently only
CSMA/CD <00001> is specified. No other protocols are supported.
Default/Attribute
0, RO
0, RO
0, RW
-
The default value
comes from
EEPROM, RO
0, RO
1, RW
1, RW
1, RW
1, RW
<00001>, RW
2001-11-9
27
Rev.1.41