SC18IM700 Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza

componentes Descripción

Lista de partido

SC18IM700

Master I2C-bus controller with UART interface

Philips Electronics 

Philips Semiconductors

SC18IM700

Master I2C-bus controller with UART interface

[4] These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the

solder cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink

on the top side, the solder might be deposited on the heatsink surface.

[5] If wave soldering is considered, then the package must be placed at a 45° angle to the solder wave

direction. The package footprint must incorporate solder thieves downstream and at the side corners.

[6] Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is

definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.

[7] Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger

than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.

[8] Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered

pre-mounted on flex foil. However, the image sensor package can be mounted by the client on a flex foil by

using a hot bar soldering process. The appropriate soldering profile can be provided on request.

[9] Hot bar soldering or manual soldering is suitable for PMFP packages.

15. Abbreviations

Table 14: Abbreviations

Acronym

Description

ASCII

American Standard Code for Information Interchange

FIFO

First In, First Out

GPIO

General Purpose Input/Output

I2C-bus

Inter Integrated Circuit bus

RXFIFO

Receive FIFO

TXFIFO

Transmit FIFO

UART

Universal Asynchronous Receiver/Transmitter

16. Revision history

Table 15: Revision history

Document ID

Release date

SC18IM700_1

20060228

Data sheet status

Product data sheet

Change notice Doc. number

-

-

Supersedes

-

SC18IM700_1

Product data sheet

Rev. 01 — 28 February 2006

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

19 of 21

Share Link: