LPC47M112-MC Ver la hoja de datos (PDF) - SMSC -> Microchip

Número de pieza

componentes Descripción

Lista de partido

LPC47M112-MC

Enhanced Super I/O Controller with LPC Interface / Dual Game Port Interface

SMSC -> Microchip 

Enhanced Super I/O Controller with LPC Interface

Datasheet

Buffer Type Descriptions

Note: The buffer type values are specified at VCC=3.3V

IO12

Input/Output, 12mA sink, 6mA source.

IS/O12

Input with Schmitt Trigger/Output, 12mA sink, 6mA source.

O12

Output, 12mA sink, 6mA source.

OD12

Open Drain Output, 12mA sink.

O6

Output, 6mA sink, 3mA source.

O8

Output, 8mA sink, 4mA source.

OD14

Open Drain Output, 14mA sink.

OP14

Output, 14mA sink, 14mA source.

IOP14

Input/Output, 14mA sink, 14mA source. Backdrive protected.

IS/OP14

Input with Schmitt Trigger/Output, 14mA sink, 14mA source, Backdrive Protected.

IOD16

Input/Output (Open Drain), 16mA sink.

O4

Output, 4mA sink, 2mA source.

IO8

Input/Output, 8mA sink, 4mA source.

I

Input TTL Compatible.

IS

Input with Schmitt Trigger.

PCI_IO

Input/Output. These pins must meet the PCI 3.3V AC and DC Characteristics. (Note 1)

PCI_O

Output. These pins must meet the PCI 3.3V AC and DC Characteristics. (Note 1)

PCI_OD

Open Drain Output. These pins must meet the PCI 3.3V AC and DC Characteristics.

(Note 1)

PCI_I

Input. These pins must meet the PCI 3.3V AC and DC Characteristics. (Note 1)

PCI_ICLK

Clock Input. These pins must meet the PCI 3.3V AC and DC Characteristics and timing. (Note 2)

Note 1. See the PCI Local Bus Specification, Revision 2.1, Section 4.2.2.

Note 2. See the PCI Local Bus Specification, Revision 2.1, Section 4.2.2. and 4.2.3.

Pins That Require External Pullup Resistors

The following pins require external pullup resistors:

ƒ KDAT

ƒ KCLK

ƒ MDAT

ƒ MCLK

ƒ GP36/KBDRST if KBDRST function is used

ƒ GP37/A20M if A20M function is used

ƒ GP20/P17 If P17 function is used

ƒ GP21/P16 if P16 function is used

ƒ GP22/P12 if P12 function is used

ƒ GP27/nIO_SMI if nIO_SMI function is used as Open Collector Output

ƒ GP42/nIO_PME if nIO_PME function is used as Open Collector Output

ƒ SER_IRQ

ƒ GP40/DRVDEN0 if DRVDEN0 function is used as Open Collector

ƒ GP41/DRVDEN1 if DRVDEN1 function is used as Open Collector

ƒ nMTR0 if used as Open Collector Output

ƒ nDS0 if used as Open Collector Output

ƒ nDIR if used as Open Collector Output

ƒ nSTEP if used as Open Collector Output

ƒ nWDATA if used as Open Collector Output

ƒ nWGATE if used as Open Collector Output

ƒ nHDSEL if used as Open Collector Output

ƒ nINDEX

ƒ nTRK0

ƒ nWRTPRT

ƒ nRDATA

ƒ nDSKCHG

SMSC DS – LPC47M112

Page 13

DATASHEET

Rev. 02-16-07

Share Link: