42477-0005 Ver la hoja de datos (PDF) - Molex Connectors
Número de pieza
componentes Descripción
Lista de partido
42477-0005 Datasheet PDF : 3 Pages
| |||
638240200 Extractor Tool for .093 and HCS-125 Product Series
3. Use the side with .125 marked on the opposite end of the ring for extraction of 3.18mm (.125") Diameter HCS-
125 Pin and Socket Crimp Terminals.
4. The Extractor Tool must be In Line with the terminal, as shown. Push terminal forward in arrow direction
before using the Extractor Tool. See Figure 1.
5. Insert the appropriate Extractor Tube into the hole of the connector housing. When fully inserted, the
extractor tool will depress the locking tabs of the terminal. Push the terminal back through the connector
housing and pull the terminated wire out in the arrow direction as shown. See Figure 2.
6. Molex does not offer repair parts for Extractor Tools due to the inexpensive nature of these tools.
HANDLE
CONNECTOR
HOUSING
.125
EXTRACTOR
TUBE
.093
EXTRACTOR
TUBE
WIRE
TERMINAL
Figure 1
.125 EXTRACTOR
TUBE
TERMINAL
.093 EXTRACTOR
TUBE
TERMINAL
EXTRACTOR
TUBE
CONNECTOR
HOUSING
LOCKING TABS
Figure 2
Contact Information
For more information on Molex application tooling please contact Molex at 1-800-786-6539.
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
amerinfo@molex.com
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
feninfo@molex.com
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
fesinfo@molex.com
European Headquarters
Munich, Germany
49-89-413092-0
eurinfo@molex.com
Visit our Web site at http://www.molex.com
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax: 630-969-1352
Doc No. ATS-638240200 Release Date: 03-17-10
Revision: A
Revision Date: 03-17-10
UNCONTROLLED COPY
Page 3 of 3
Share Link: 