RF2603PCBA Ver la hoja de datos (PDF) - RF Micro Devices
Número de pieza
componentes Descripción
Lista de partido
RF2603PCBA Datasheet PDF : 6 Pages
| |||
RF2603
Pin Function Description
Interface Schematic
1
VCC
Supply Voltage pin. External bypassing is required. The trace length
between the pin and bypass capacitors should be minimized. The
ground side of the bypass capacitor should be connected immediately
to ground plane.
2
NC
Not connected.
3
NC
Not connected.
4
GND
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
5
LO IN
LO input pin. This pin is internally DC-biased and should be
DC-blocked if connected to a device with a DC level present. The input
impedance is 50Ω.
6
GND
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
7
RF OUT RF output pin. This pin is internally DC-biased and should be
DC-blocked if connected to a device with a DC level present. This pin
must be externally matched for 50Ω output impedance.
8
VCC
Supply Voltage pin. External bypassing is required. Either a length of
transmission line or external inductor is needed between this pin and
the bypass capacitor for tuning the output to 50Ω.
6
9
NC
Not connected.
10
NC
Not connected.
11
GND
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
12
VCC
Supply Voltage pin. External bypassing is required. Either a length of
transmission line or external inductor is needed between this pin and
the bypass capacitor for tuning the mixer.
13
GND
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
14
IF IN
IF input pin. This pin is internally DC-biased and should be DC-blocked
if connected to a device with a DC level present.
15
NC
Not connected.
16 TX ENABLE TX enable pin.
Rev A2 010403
6-39
Share Link: 