datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

74HC7245 Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza
componentes Descripción
Lista de partido
74HC7245 Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
Philips Semiconductors
Octal bus Schmitt-trigger transceiver;
3-state
Product specification
74HC/HCT7245
FEATURES
Octal bidirectional bus interface
Non-inverting 3-state outputs
Output capability: bus driver
ICC category: MSI
Schmitt-trigger action on all data
inputs
GENERAL DESCRIPTION
The 74HC/HCT7245 are high-speed
Si-gate CMOS devices and are pin
compatible with low power Schottky
TTL (LSTTL). They are specified in
compliance with JEDEC standard
no. 7A.
The 74HC/HCT7245 are octal
transceivers featuring non-inverting
3-state bus compatible outputs in
both send and receive directions. The
“7245” features an output enable
(OE) input for easy cascading and a
send/receive input (DIR) for direction
control. OE controls the outputs so
that the buses are effectively isolated.
The 74HC/HCT7245 have
Schmitt-trigger inputs. These inputs
are capable of transforming slowly
changing input signals into sharply
defined jitter-free output signals.
The “7245” is identical to the “245” but
has hysteresis on the data inputs.
FUNCTION TABLE
INPUTS
OE DIR
LL
LH
HX
INPUTS/OUTPUTS
An
A=B
inputs
Z
Bn
inputs
B=A
Z
Notes
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
Z = high impedance OFF-state
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
SYMBOL PARAMETER
CONDITIONS
tPHL/ tPLH
CI
CI/O
CPD
propagation delay An to Bn
input capacitance
input/output capacitance
power dissipation capacitance per transceiver
CL = 15 pF; VCC = 5 V
notes 1 and 2
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where:
fi = input frequency in MHz
fo = output frequency in MHz
(CL × VCC2 × fo) = sum of outputs
CL = output load capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC 1.5 V
TYPICAL
HC HCT
8
12
3.5 3.5
10
10
40
40
UNIT
ns
pF
pF
pF
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
December 1990
2

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]