A25L40PTN-F Ver la hoja de datos (PDF) - AMIC Technology

Número de pieza

componentes Descripción

Lista de partido

A25L40PTN-F

4 Mbit, Low Voltage, Serial Flash Memory With 85MHz SPI Bus Interface

AMIC Technology 

Read Device Identification (RDID)

The Read Identification (RDID) instruction allows the 8-bit

manufacturer identification code to be read, followed by two

bytes of device identification. The manufacturer identification

is assigned by JEDEC, and has the value 37h, plus the

continuation identification for AMIC Technology. The device

identification is assigned by the device manufacturer, and

indicates the memory in the first bytes (20h), and the memory

capacity of the device in the second byte (13h).

The Device Identification of memory capacity is 13h.

Any Read Identification (RDID) instruction while an Erase, or

Program cycle is in progress, is not decoded, and has no

effect on the cycle that is in progress.

The device is first selected by driving Chip Select ( S ) Low.

A25L40P Series

Then, the 8-bit instruction code for the instruction is shifted in.

This is followed by the 32-bit device identification, stored in

the memory, being shifted out on Serial Data Output (Q),

each bit being shifted out during the falling edge of Serial

Clock (C).

The instruction sequence is shown in Figure 16. The Read

Identification (RDID) instruction is terminated by driving Chip

Select ( S ) High at any time during data output.

When Chip Select ( S ) is driven High, the device is put in the

Stand-by Power mode. Once in the Stand-by Power mode,

the device waits to be selected, so that it can receive, decode

and execute instructions.

Table 6. Read Identification (READ_ID) Data-Out Sequence

Manufacture Identification

Device Identification

Continuation ID

Manufacture ID

Memory Type

Memory Capacity

7Fh

37h

20h

13h

Figure 16. Read Identification (RDID) Data-Out Sequence

S

0 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 21 22 23 24 25 26 29 30 31 32 33 34

C

Instruction

D

37 38 39

Q

31 30 29

26 25 24 23 22 21

18 17 16 15 14 13

10 9 8 7 6 5

2 10

High Impedance

Continuation ID

Manufacture ID

Memory Type

Memory Capacity

PRELIMINARY (May, 2007, Version 0.4)

20

AMIC Technology Corp.

Share Link: