A25L80PQ-UF(2007) Ver la hoja de datos (PDF) - AMIC Technology
Número de pieza
componentes Descripción
Lista de partido
A25L80PQ-UF
(Rev.:2007)
(Rev.:2007)
AMIC Technology
A25L80PQ-UF Datasheet PDF : 37 Pages
| |||
A25L80P Series
8 Mbit, Low Voltage, Serial Flash Memory
With 75 MHz SPI Bus Interface
FEATURES
8 Mbit of Flash Memory
Flexible Sector Architecture (4/4/8/16/32)KB/64x15 KB
Bulk Erase (8 Mbit) in 10s (typical)
Sector Erase (512 Kbit) in 1s (typical)
Page Program (up to 256 Bytes) in 3ms (typical)
2.7 to 3.6V Single Supply Voltage
SPI Bus Compatible Serial Interface
Clock Rate (maximum)
- 50MHz (2.7V~3.6V)
- 75MHz (3.0V~3.6V)
Deep Power-down Mode 1µA (typical)
Electronic Signature
- JEDEC Standard Two-Byte Signature (2014h)
- RES Instruction, One-Byte, Signature (13h)
Package options
- 8-pin SOP (150/209mil), 8-pin DIP (300mil) or 8-pin QFN
- All Pb-free (Lead-free) products are RoHS compliant
GENERAL DESCRIPTION
The A25L80P is an 8 Mbit (1M x 8) Serial Flash Memory,
with advanced write protection mechanisms, accessed by a
high speed SPI-compatible bus.
The memory can be programmed 1 to 256 bytes at a time,
using the Page Program instruction.
The memory is organized as 16 sectors, each containing 256
pages. Each page is 256 bytes wide. Thus, the whole
memory can be viewed as consisting of 4096 pages, or
1,048,576 bytes.
The whole memory can be erased using the Bulk Erase
instruction, or a sector at a time, using the Sector Erase
instruction.
Pin Configurations
SO8 Connections
DIP8 Connections
QFN8 Connections
A25L80P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
A25L80P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
A25L80P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
(April, 2007, Version 1.5)
1
AMIC Technology Corp.
Share Link: