A29DL323UG-120 Ver la hoja de datos (PDF) - AMIC Technology

Número de pieza

componentes Descripción

Lista de partido

A29DL323UG-120

32 Megabit (4M x 8-Bit/2M x 16-Bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory

AMIC Technology 

A29DL32x Series

ABSOLUTE MAXIMUM RATINGS*

Storage Temperature Plastic Packages. . . -65°C to + 150°C

Ambient Temperature with Power Applied. -65°C to + 125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . . . . ……. . -0.5V to +4.0V

A9, OE & RESET (Note 2) . . . . . . . . . . . . -0.5V to +12.5V

WP /ACC . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +10.5V

All other pins (Note 1) . . . . . . . . . . …. . -0.5V to VCC + 0.5V

Output Short Circuit Current (Note 3) . . . . . . . …. . 200mA

Notes:

1. Minimum DC voltage on input or I/O pins is -0.5V. During

voltage transitions, input or I/O pins may undershoot VSS

to -2.0V for periods of up to 20ns. Maximum DC voltage

on input and I/O pins is VCC +0.5V. See Figure 7. During

voltage transitions, input or I/O pins may overshoot to

VCC +2.0V for periods up to 20ns. See Figure 8.

2. Minimum DC input voltage on A9, OE , RESET and

WP /ACC is -0.5V. During voltage transitions, A9, OE ,

WP /ACC and RESET may overshoot VSS to -2.0V for

periods of up to 20ns. See Figure 7. Maximum DC input

voltage on A9 is +12.5V which may overshoot to 14.0V

for periods up to 20ns. Maximum DC input voltage on

WP /ACC is +9.5V which may overshoot to +12.0V for

period up to 20ns.

3. No more than one output is shorted to ground at a time.

Duration of the short circuit should not be greater than

one second.

Figure 7. Maximum Negative Overshoot Waveform

*Comments

Stresses above those listed under "Absolute Maximum

Ratings" may cause permanent damage to this device. This

is a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (TA) . . . . . . . . . . . . . . -40°C to +85°C

VCC Supply Voltages

VCC for all devices . . . . . . . . . . . . . . . . . …...+2.7V to +3.6V

Operating ranges define those limits between which the

functionally of the device is guaranteed.

+0.8V

-0.5V

20ns

20ns

-2.0V

20ns

Figure 8. Maximum Positive Overshoot Waveform

VCC+0.5V

2.0V

VCC+2.0V

20ns

20ns

20ns

PRELIMINARY (May, 2005, Version 0.0)

30

AMIC Technology, Corp.

Share Link: