AD8352(Rev0) Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Lista de partido
AD8352 Datasheet PDF : 20 Pages
| |||
AD8352
NOISE DISTORTION SPECIFICATIONS
VS = 5 V, RL=200 Ω differential, RG=118 Ω (AV = 10 dB), VOUT = 2 V p-p composite, T = 25°C; parameters specified differentially, unless
otherwise noted. CD and RD are selected for differential broadband operation (see Table 6 and Table 7).
Table 2.
Parameter
Conditions
Min Typ
Max Unit
10 MHz
Second/Third Harmonic Distortion1 RL = 1 kΩ, VOUT = 2 V p-p
−88/−95
dBc
RL = 200 Ω, VOUT = 2 V p-p
−86/−82
dBc
Output Third-Order Intercept
RL = 200 Ω, f1 = 9.5 MHz, f2 = 10.5 MHz
+38
dBm
Third-Order IMD
RL = 1 kΩ, f1 = 9.5 MHz, f2 = 10.5 MHz, VOUT = 2 V p-p composite
−86
dBc
RL = 200 Ω, f1 = 9.5 MHz, f2 = 10.5 MHz, VOUT = 2 V p-p composite
−81
dBc
Noise Spectral Density (RTI)
+2.7
nV/√Hz
1 dB Compression Point (RTO)
+15.7
dBm
70 MHz
Second/Third HarmonicDistortion1 RL = 1 kΩ, RG = 178 Ω, VOUT = 2 V p-p
−83/−84
dBc
RL = 200 Ω, RG = 115 Ω, VOUT = 2 V p-p
−84/−82
dBc
Output Third-Order Intercept
RL = 200 Ω f1 = 69.5 MHz, f2 = 70.5 MHz
+40
dBm
Third-Order IMD
RL = 1 kΩ, f1 = 69.5 MHz, f2 = 70.5 MHz, VOUT = 2 V p-p composite
−91
dBc
RL = 200 Ω, f1 = 69.5 MHz, f2 = 70.5 MHz, VOUT = 2 V p-p composite
−83
dBc
Noise Spectral Density (RTI)
+2.7
nV/√Hz
1 dB Compression Point (RTO)
+15.7
dBm
100 MHz
Second/Third Harmonic Distortion RL = 1 kΩ, VOUT = 2 V p-p
−83/−83
dBc
RL = 200 Ω, VOUT = 2 V p-p
−84/−82
dBc
Output Third-Order Intercept
RL = 200 Ω, f1 = 99.5 MHz, f2 = 100.5 MHz
+40
dBm
Third-Order IMD
RL = 1 kΩ, f1 = 99.5 MHz, f2 = 100.5 MHz, VOUT = 2 V p-p composite
−91
dBc
RL = 200 Ω, f1 = 99.5 MHz, f2 = 100.5 MHz, VOUT = 2 V p-p composite
−84
dBc
Noise Spectral Density (RTI)
+2.7
nV/√Hz
1 dB Compression Point (RTO)
+15.6
dBm
140 MHz
Second/Third Harmonic Distortion2 RL = 1 kΩ, VOUT = 2 V p-p
−83/−82
dBc
RL = 200 Ω, VOUT = 2 V p-p
−82/−84
dBc
Output Third-Order Intercept
RL = 200 Ω, f1 = 139.5 MHz, f2 = 140.5 MHz
+41
dBm
Third-Order IMD
RL = 1 kΩ, f1 = 139.5 MHz, f2 = 140.5 MHz, VOUT = 2 V p-p composite
−89
dBc
RL = 200 Ω, f1 = 139.5 MHz, f2 = 140.5 MHz, VOUT = 2 V p-p
composite
−85
dBc
Noise Spectral Density (RTI)
+2.7
nV/√Hz
1 dB Compression Point (RTO)
+15.5
dBm
1 When using the evaluation board at frequencies below 50 MHz, replace the Output Balun T1 with a transformer such as Mini-Circuits® ADT1-1WT to obtain the low
frequency balance required for differential HD2 cancellation.
2 CD and RD can be optimized for broadband operation below 180 MHz. For operation above 300 MHz, CD and RD components are not required.
Rev. 0| Page 4 of 20
Share Link: 