AD9146BCPZ Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Lista de partido

AD9146BCPZ

Dual, 16-Bit, 1230 MSPS, TxDAC+ Digital-to-Analog Converter

Analog Devices 

AD9146

Data Sheet

Pin No.

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

Mnemonic

D0N

DVDD18

TXENABLE

SDIO

SCLK

CS

IRQ

DVDD18

RESET

AVDD33

IOUT2P

IOUT2N

AVDD33

AVSS

REFIO

FSADJ

AVSS

AVDD33

IOUT1N

IOUT1P

AVDD33

EPAD

Description

Data Bit 0 (LSB), Negative.

1.8 V Digital Supply. Supplies power to digital core and digital data ports.

Active High Transmit Path Enable (CMOS). A low level on this pin clamps the DAC outputs to midscale.

Serial Port Data Input/Output (CMOS).

Serial Port Clock Input (CMOS).

Serial Port Chip Select, Active Low (CMOS).

Interrupt Request. Open-drain, active low output. Pull this pin high external to the device.

1.8 V Digital Supply. Supplies power to digital core and digital data ports.

Reset, Active Low (CMOS).

3.3 V Analog Supply.

Q DAC Positive Current Output.

Q DAC Negative Current Output.

3.3 V Analog Supply.

Analog Supply Common.

1.2 V Band Gap Voltage Reference Output. Should be decoupled to AVSS with a 0.1 µF capacitor.

Full-Scale Current Output Adjust. Place a 10 kΩ resistor from this pin to AVSS.

Analog Supply Common.

3.3 V Analog Supply.

I DAC Negative Current Output.

I DAC Positive Current Output.

3.3 V Analog Supply.

The exposed pad (EPAD) must be soldered to the ground plane (AVSS). The EPAD provides an electrical,

thermal, and mechanical connection to the board.

Rev. A | Page 10 of 56

Share Link: