AD9411 Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Lista de partido
AD9411 Datasheet PDF : 28 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
Rating
AVDD, DRVDD
Analog Inputs
4V
–0.5 V to AVDD +0.5 V
Digital Inputs
–0.5 V to DRVDD +0.5 V
REFIN Inputs
–0.5 V to AVDD +0.5 V
Digital Output Current
20 mA
Operating Temperature
–55ºC to +125°C
Storage Temperature
–65ºC to +150°C
Maximum Junction Temperature 150°C
Maximum Case Temperature
150°C
θJA1
25°C/W, 32°C/W
1 Typical θJA = 32°C/W (heat slug not soldered); typical θJA = 25°C/W (heat slug
soldered) for multilayer board in still air with solid ground plane.
AD9411
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions outside of those indicated in the operation
section of this specification is not implied. Exposure to absolute
maximum ratings conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. A | Page 7 of 28
Share Link: 