9170-01CN08LF Ver la hoja de datos (PDF) - Integrated Device Technology
Número de pieza
componentes Descripción
Lista de partido
9170-01CN08LF Datasheet PDF : 12 Pages
| |||
AV9170
AV9170-05 is only available through America II distributor
Using CLK2 Feedback
Connecting CLK2 to FBIN as shown in Figure 2 will cause
all of the rising edges to be aligned (Figure 4).
Figure 2:
Using CLK1 Feedback
With CLK1 connected to FBIN as shown in Figure 3, the
input and CLK1 output will be aligned on the rising edge,
but CLK2 can be either rising or falling (Figure 5). Consult
ICS if the CLK1 frequency is desired to be higher than 107
M Hz.
Figure 3:
For CLK2 frequencies 10 - 53.5 MHz* (-01)
For CLK2 frequencies 2.5 - 13.37 MHz (-02)
*Maximum33.3MHz @ 3.3V(-01),8.33MHz @ 3.3V(-02)
Table 2:
Functionality Table for AV9170-01, -
02 with CLK2 Feedback
FS1 FS0
0
0
0
1
1
0
1
1
CLK1
INx4
INx8
INx2
INx16
CLK2
INx2
INx4
IN
INx8
For CLK1 frequencies 20 - 107 MHz† (-01)
For CLK1 frequencies 5 - 26.75 MHz (-02)
†Maximum66.7MHz @ 3.3V(-01),16.7MHz @ 3.3V(-02)
Table 3:
Functionality Table for AV9170-01, -
02 with CLK1 Feedback
FS1 FS0
0
0
0
1
1
0
1
1
CLK1
INx2
INx4
IN
INx8
CLK2
IN
INx2
IN÷2
INx4
Figure 4:
Input and Output Clock Waveforms
with CLK2 Connected to FBIN
Figure 5:
Input and Output Clock Waveforms
with CLK1 Connected to FBIN
0237I—12/02/08
4
Share Link: 