TES3-4812 Ver la hoja de datos (PDF) - TRACO Electronic AG
Número de pieza
componentes Descripción
Lista de partido
TES3-4812 Datasheet PDF : 4 Pages
| |||
DC/DC Converter
TES 3 Series
3 Watt
Input Specifications
Input current no load /full load
Start-up voltage /
under voltage shut down
Surge voltage (1 sec. max.)
Reverse voltage protection
Reflected input ripple current
Input filter
Output Specifications
12 Vin models
24 Vin models
48 Vin models
12 Vin models
24 Vin models
48 Vin models
12 Vin models
24 Vin models
48 Vin models
20 mA / 300 mA typ.
5 mA / 150 mA typ.
3 mA / 75 mA typ.
6 VDC / 8 VDC typ.
12 VDC / 16 VDC typ.
24 VDC / 32 VDC typ
25 V max.
50 V max.
100 V max.
0.5 A max.
Can be reduced by ext. 1–2.2 µF polyester film
capacitor
Pi filter
Voltage set accuracy
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
– single output models
– dual output models balanced load
– dual output models unbalanced load
Ripple and noise
Temperature coefficient
Current limitation
Short circuit protection
Capacitive load
– single output models
– dual output models
General Specifications
±1%
± 0.3 % max.
± 1.0 % max.
± 1.0 % max.
± 2.0 % max.
50 mVpk-pk max.
± 0.02 % / °C
> 110% of Iout max., foldback
Hiccup mode, indefinite
(no automatic recovery)
470 µF
180 µF
Temperature ranges – Operating
– Case temperature
– Storage
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 E)
Isolation voltage
Input/Output
Isolation capacity Input/Output
Isolation resistance Input/Output
Switching frequency
Safety standards
Safety approvals
– 40 °C ... +75 °C
+ 100 °C max.
– 40 °C ... +125 °C
95 % rel H max.
>1‘000‘000 h @ 25 °C
1‘500 VDC
65 pF typ.
>1‘000 Mohm
300 kHz typ. (Frequency modulation PFM)
UL 1950, EN 60950, IEC 60950
Compliance up to 60 VDC input voltage
(SELV limit)
UL/cUL File E188913
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2
Share Link: 