Regulator ICs
FTiming chart
BA3170
FExternal components
Setting the “end point voltage”
Fig.3
Fig.2
Set the “end point voltage” Vbuf using resistors R1 and
R2.
Example:
To set Vbuf to 8.4V:
1.22 = R2 / (R1 ) R2) 8.4
R1 = 5.88 . . . R2
If R2 = 10kΩ, then
R1 = 58.7kΩ
∗ For measurement of the electrical characteristics, Vref and Vbuf are
shorted.
399