datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

MX98L715BEC Ver la hoja de datos (PDF) - Macronix International

Número de pieza
componentes Descripción
Lista de partido
MX98L715BEC
Macronix
Macronix International Macronix
MX98L715BEC Datasheet PDF : 50 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
MX98L715BEC
Field
11
10
9
8
7
6
5
4
3
2
1
0
Name
GTE
ETI
RWT
RPS
RU
RI
UNF
LPANCI
TJT
TU
TPS
TI
Description
General Purpose Timer Expired, indicating CSR11 counter has expired.
Early Transmit Interrupt, indicating the packet to be transmitted was fully transferred to
internal TX FIFO. CSR5<0> will automatically clears this bit.
Receive Watchdog Time-out, reflects the network line status where receive watchdog
timer has expired while the other node is still active on the network.
Write only, when written with any value, MX98L715BEC reads receive descriptor list in
host memory pointed by CSR4 and processes the list.
Receive Buffer Unavailable, the receive process is suspended due to the next
descriptor in the receive list is owned by host. If no receive poll command is issued, the
reception process resumes when the next recognized incoming frame is received.
Receive Interrupt, indicating the completion of a frame reception.
Transmit Underflow, indicating transmit FIFO has run empty before the completion of a
packet transmission.
When autonegotiation is not enabled ( CSR14<7>=0 ), this bit indicates that the 10
Base-T link integrity test has completed successfully, after the link was down. This bit is
also set as as a result of writing 0 to CSR14<12> ( Link Test Enable ).
When Autonegotiation is enabled ( CSR14<7> =1 ) , this bit indicates that the autonegotiation
has completed ( CSR12<14:12>=5 ). CSR12 should then be read for a link status report.
This bit is only valid when CSR6<18>=0, i.e. 10 Base-T port is selected Link Fail interrupt
( CSR5<12> ) will automatically clears this bit.
Transmit Jabber Timeout, indicating the MX98715 has been excessively active. The
transmit process is aborted and placed in the stopped state. TDES0<1> is also set.
Transmit Buffer Unavailable, transmit process is suspended due to the next descriptor in
the transmit list is owned by host.
Transmit Process Stopped.
Transmit Interrupt. indicating a frame transmission was completed.
P/N:PM0695
REV. 0.3, MAR. 30, 2001
20

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]