PI3B16244V(2004) Ver la hoja de datos (PDF) - Pericom Semiconductor

Número de pieza

componentes Descripción

Lista de partido

PI3B16244V
(Rev.:2004)

3.3V, 16-Bit, 4-Port NanoSwitch™

Pericom Semiconductor 

PI3B16244

1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011322.11322V334455,6617788699-00B1122i33t44,5566477-88P9900o1122r33t4455N6677a8899n00o1122S1122w3344i55t66c77h8899™001122

Maximum Ratings

(Above which useful life may be impaired. For user guidelines, not tested.)

Storage Temperature ...................................................... –65°C to +150°C

Ambient Temperature with Power Applied ...................... –40°C to +85°C

Supply Voltage Range ....................................................... –0.5Vto+4.6V

DC Input Voltage ............................................................... –0.5Vto+4.6V

DC Output Current ........................................................................120mA

Power Dissipation ............................................................................. 0.5W

Note:

Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is a

stress rating only and functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this specification is not implied.

Exposure to absolute maximum rating conditions for extended

periods may affect reliability.

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.0V to 3.6V)

Parameters

Description

Test Conditions(1)

Min. Typ.(2)

VIH

VIL

IIH

IIL

IO ZH

VIK

RO N

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

Input HIGH Current

VCC = Max., VIN = VCC

Input LOW Current

VCC = Max., VIN = GND

High Impedance Output Current 0 ≤ A, B ≤ VCC

Clamp Diode Voltage

VCC = Min., IIN = –18mA

–0.7

Switch ON Resistance(3)

VCC = Min., VIN = 0.0V, ION = 48mA

5

VCC = Min., VIN = 2.4V, ION = 15mA

10

Max.

0.8

±1

±1

±1

–1.2

8

15

Units

V

µA

V

Ω

Capacitance (TA = 25°C, f = 1 MHz)

Parameters(4)

Description

Test Conditions

Typ.

Units

CIN

COFF

CON

Input Capacitance

A/B Capacitance, Switch Off

A/B Capacitance, Switch On

VIN = 0V

3.0

8.5

pF

17.0

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.

3. Measured by the voltage drop between A and B pin at indicated current through the switch. On-Resistance is determined by the lower of the

voltages on the two (A,B) pins.

4. This parameter is determined by device characterization but is not production tested.

2

PS8170D

10/01/04

Share Link: