PI3B16232A Ver la hoja de datos (PDF) - Pericom Semiconductor
Número de pieza
componentes Descripción
Lista de partido
PI3B16232A Datasheet PDF : 5 Pages
| |||
PI3B16232
3.3V, Synchronous 16-Bit to 32-Bit
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345F67E89T01M234u56x7/8D90e12m34u56x78N90a12n1o23S45w67i8t9c0h12
Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ........................................................ 65°Cto+150°C
Ambient Temperature with Power Applied ....................... 40°C to +85°C
Supply Voltage Range ........................................................ 0.5Vto+4.6V
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device.
This is a stress rating only and functional operation of the
DC Input Voltage ................................................................ 0.5Vto+4.6V
DC Output Current ......................................................................... 120mA
Power Dissipation ............................................................................. 0.5W
device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
DC Electrical Characteristics (Over the Operating Range, TA = 40°C to +85°C, VCC = 3.0V to 3.6V)
Parameters
Description
Test Conditions(1)
Min.
VIH
Input HIGH Voltage
Guaranteed Logic HIGH Level
2.0
VIL
Input LOW Voltage
Guaranteed Logic LOW Level
0.5
IIH
Input High Current
VCC = Max., VIN = VCC
IIL
Input Low Current
VCC = Max., VIN = GND
IOZH
High Impedance Output Current 0 ≤ A, B ≤ VCC
VIK
Clamp Diode Voltage
VCC = Min., VIN = 18MA
RON
Switch ON Resistance(3)
VCC = Min., IIN = 0.0V, ION = 48mA or 64mA
VCC = Min., VIN = 2.4V, ION = 15mA
Typ(1)
0.7
5
10
Max. Units
V
0.8
±1
±1 µA
±1
1.2 V
8
Ω
15
Capacitance (TA = 25°C, f = 1 MHz)
Parameters(4)
Description
Test Conditions
Typ.
Units
CIN
Input Capacitance
CON
A/B Capacitance, Switch On
VIN = 0V
3.0
pF
25.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Measured by the voltage drop between A and B pin at indicated current through the switch. ON resistance is determined by the
lower of the voltages on the two (A,B) pins.
4. This parameter is determined by device characterization but is not production tested.
2
PS8178C 03/18/02
Share Link: 