DF19(2000) Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

Lista de partido

DF19
(Rev.:2000)

1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.

HIROSE ELECTRIC 

BSoldering Temperature Profile

1. Recommended temperature profile

(Note 1) The temperature profile can be applied twice with the normal temperature profile.

(Note 2) The temperature is measured at the connector lead.

2. Recommended manual soldering conditions

3. Recommended screen thickness

4. Warpage of board

5. Cleaning

6. Wiring

7. Precautions

Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less

0.15mm

Max. 0.03mm at the connector center with the connector ends as the reference.

See the separate “Guide to Hirose Nylon connectors.”

See the separate “Guide to Hirose Nylon connectors.”

s As crimp terminals are extremely small, crimping must be performed with care: observe

the directions in the “Crimping Condition Sheet” and “Crimping Standard Sheet.”

s Due to the ultra miniature design care needs to be taken when disconnecting to avoid

accidental damage.

11

Share Link: