GP1A34LC Ver la hoja de datos (PDF) - Sharp Electronics

Número de pieza

componentes Descripción

Lista de partido

GP1A34LC

OPIC Photointerrupter with Connector

Sharp Electronics 

s Precautions for Use

( 1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside

the case; therefore, dip cleaning or ultrasonic cleaning are prohibited.

( 2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning slovent.

However, do not perform the above cleaning using a soft cloth with cleaning solvent in the

marking portion.

In this case, use only the follwing type of cleaning solvent used for wiping off:

Ethyl alcohol, Methyl alcohol, Isopropyl alcohol

When the cleaning solvents except for specified materials are used, please consult us.

( 3) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01µF

between Vcc and GND near the device.

( 4) As for other general cautions, refer to the chapter “ Precautions for Use ”.

GP1A34LC

Share Link: