GP2L24ABJ00F Ver la hoja de datos (PDF) - Sharp Electronics

Número de pieza

componentes Descripción

Lista de partido

GP2L24ABJ00F

Compact Refl ective Photointerrupter

Sharp Electronics 

■ Manufacturing Guidelines

● Soldering Method

Flow Soldering:

Soldering should be completed below 260˚C and within 5 s.

Soldering area is 1mm or more away from the bottom of housing.

Please take care not to let any external force exert on lead pins.

Please don't do soldering with preheating, and please don't do soldering by reflow.

GP2L24J0000F

Other notice

Please test the soldering method in actual condition and make sure the soldering works fine, since the

impact on the junction between the device and PCB varies depending on the cooling and soldering

conditions.

● Cleaning instructions

Solvent cleaning :

Solvent temperature should be 45˚C or below. Immersion time should be 3 minutes or less.

Ultrasonic cleaning :

Do not execute ultrasonic cleaning.

Recommended solvent materials :

Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.

● Presence of ODC

This product shall not contain the following materials.

And they are not used in the production process for this product.

Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)

Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.

This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).

•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated

diphenyl ethers (PBDE).

Sheet No.: D3-A02301EN

10

Share Link: