H8/36057F Ver la hoja de datos (PDF) - Renesas Electronics

Número de pieza

componentes Descripción

Lista de partido

H8/36057F

Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series

Renesas Electronics 

Notes:

When using an on-chip emulator (E7, E8) for H8/36057 and H8/36037 program development and

debugging, the following restrictions must be noted.

1. The NMI pin is reserved for the E7 or E8, and cannot be used.

2. Pins P85, P86, and P87 cannot be used. In order to use these pins, additional hardware must be

provided on the user board.

3. Area H'D000 to H'DFFF is used by the E7 or E8, and is not available to the user.

4. Area H'F780 to H'FB7F must on no account be accessed.

5. When the E7 or E8 is used, address breaks can be set as either available to the user or for use

by the E7 or E8. If address breaks are set as being used by the E7 or E8, the address break

control registers must not be accessed.

6. When the E7 or E8 is used, NMI is an input/output pin (open-drain in output mode), P85 and

P87 are input pins, and P86 is an output pin.

7. In on-board programming mode by boot mode, channel 1 (P21/RXD and P22/TXD) for SCI3

is used.

Related Manuals:

The latest versions of all related manuals are available from our web site.

Please ensure you have the latest versions of all documents you require.

http://www.renesas.com/

H8/36057 Group and H8/36037 Group manuals:

Document Title

H8/36057 Group, H8/36037 Group Hardware Manual

H8/300H Series Software Manual

Document No.

This manual

REJ09B0213

User's manuals for development tools:

Document Title

Document No.

H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor REJ10B0058

User's Manual

H8S, H8/300 Series Simulator/Debugger User's Manual

REJ10B0211

H8S, H8/300 Series High-Performance Embedded Workshop 3 Tutorial

REJ10B0024

H8S, H8/300 Series High-Performance Embedded Workshop 3 User's Manual REJ10B0026

Rev. 4.00 Mar. 15, 2006 Page vii of xxxii

Share Link: