H8/3622S Ver la hoja de datos (PDF) - Renesas Electronics

Número de pieza

componentes Descripción

Lista de partido

H8/3622S

single-chip microcomputers (MCU: microcomputer unit)

Renesas Electronics 

2.2 Register Descriptions

2.2.1 General Registers

All the general registers have the same functions, and can be used as both data registers and

address registers.

When used as data registers, they can be accessed as 16-bit registers (R0 to R7), or the high bytes

(R0H to R7H) and low bytes (R0L to R7L) can be accessed separately as 8-bit registers.

When used as address registers, the general registers are accessed as 16-bit registers (R0 to R7).

R7 also functions as the stack pointer (SP), used implicitly by hardware in exception handling and

subroutine calls. When it functions as the stack pointer, as indicated in figure 2.2, SP (R7) points

to the top of the stack.

SP (R7)

Lower address side [H'0000]

Unused area

Stack area

Upper address side [H'FFFF]

Figure 2.2 Stack Pointer

2.2.2 Control Registers

The CPU control registers include a 16-bit program counter (PC) and an 8-bit condition code

register (CCR).

(1) Program Counter (PC): This 16-bit register indicates the address of the next instruction the

CPU will execute. All instructions are fetched 16 bits (1 word) at a time, so the least significant bit

of the PC is ignored (always regarded as 0).

13

Share Link: