IDT82V3352 Ver la hoja de datos (PDF) - Integrated Device Technology

Número de pieza

componentes Descripción

Lista de partido

IDT82V3352

SYNCHRONOUS ETHERNET WAN PLL

Integrated Device Technology 

IDT82V3352

SYNCHRONOUS ETHERNET WAN PLL

2

PIN DESCRIPTION

Table 1: Pin Description

Name

OSCI

FF_SRCSW

SONET/SDH

RST

EX_SYNC1

EX_SYNC2

EX_SYNC3

IN1_CMOS

IN2_CMOS

IN1_POS

IN1_NEG

IN2_POS

IN2_NEG

Pin No.

6

13

64

48

28

33

35

29

30

23

24

25

26

I/O

Type

Description 1

Global Control Signal

I

I

pull-down

I

pull-down

I

pull-up

CMOS

CMOS

CMOS

CMOS

OSCI: Crystal Oscillator Master Clock

A nominal 12.8000 MHz clock provided by a crystal oscillator is input on this pin. It is the

master clock for the device.

FF_SRCSW: External Fast Selection Enable

During reset, this pin determines the default value of the EXT_SW bit (b4, 0BH)2. The

EXT_SW bit determines whether the External Fast Selection is enabled.

High: The default value of the EXT_SW bit (b4, 0BH) is ‘1’ (External Fast selection is

enabled);

Low: The default value of the EXT_SW bit (b4, 0BH) is ‘0’ (External Fast selection is dis-

abled).

After reset, this pin selects an input clock pair for the T0 DPLL if the External Fast selection is

enabled:

High: Pair IN1_CMOS / IN1_DIFF is selected.

Low: Pair IN2_CMOS / IN2_DIFF is selected.

After reset, the input on this pin takes no effect if the External Fast selection is disabled.

SONET/SDH: SONET / SDH Frequency Selection

During reset, this pin determines the default value of the IN_SONET_SDH bit (b2, 09H):

High: The default value of the IN_SONET_SDH bit is ‘1’ (SONET);

Low: The default value of the IN_SONET_SDH bit is ‘0’ (SDH).

After reset, the value on this pin takes no effect.

RST: Reset

A low pulse of at least 50 µs on this pin resets the device. After this pin is high, the device will

still be held in reset state for 500 ms (typical).

Frame Synchronization Input Signal

I

pull-down

I

pull-down

I

pull-down

CMOS

CMOS

CMOS

EX_SYNC1: External Sync Input 1

A 2 kHz, 4 kHz or 8 kHz signal is input on this pin.

EX_SYNC2: External Sync Input 2

A 2 kHz, 4 kHz or 8 kHz signal is input on this pin.

EX_SYNC3: External Sync Input 3

A 2 kHz, 4 kHz or 8 kHz signal is input on this pin.

Input Clock

I

pull-down

CMOS

IN1_CMOS: Input Clock 1

A 2 kHz, 4 kHz, N x 8 kHz 3, 1.544 MHz (SONET) / 2.048 MHz (SDH), 6.48 MHz, 19.44 MHz,

25.92 MHz, 38.88 MHz, 51.84 MHz, 77.76 MHz or 155.52 MHz clock is input on this pin.

I

pull-down

CMOS

IN2_CMOS: Input Clock 2

A 2 kHz, 4 kHz, N x 8 kHz 3, 1.544 MHz (SONET) / 2.048 MHz (SDH), 6.48 MHz, 19.44 MHz,

25.92 MHz, 38.88 MHz, 51.84 MHz, 77.76 MHz or 155.52 MHz clock is input on this pin.

IN1_POS / IN1_NEG: Positive / Negative Input Clock 1

A 2 kHz, 4 kHz, N x 8 kHz 3, 1.544 MHz (SONET) / 2.048 MHz (SDH), 6.48 MHz, 19.44 MHz,

I

PECL/LVDS 25.92 MHz, 38.88 MHz, 51.84 MHz, 77.76 MHz, 155.52 MHz, 156.25 MHz, 311.04 MHz or

622.08 MHz clock is differentially input on this pair of pins. Whether the clock signal is PECL

or LVDS is automatically detected.

IN2_POS / IN2_NEG: Positive / Negative Input Clock 2

A 2 kHz, 4 kHz, N x 8 kHz 3, 1.544 MHz (SONET) / 2.048 MHz (SDH), 6.48 MHz, 19.44 MHz,

I

PECL/LVDS 25.92 MHz, 38.88 MHz, 51.84 MHz, 77.76 MHz, 155.52 MHz, 156.25 MHz, 311.04 MHz or

622.08 MHz clock is differentially input on this pair of pins. Whether the clock signal is PECL

or LVDS is automatically detected.

Pin Description

11

March 23, 2009

Share Link: