IRFE9130
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min Typ Max Units
-100 — — V
— -0.10 — V/°C
— — 0.30
—
— 0.345 Ω
-2.0 — -4.0 V
1.9 — —
S
— — -25
— — -250 µA
—
— -100 nA
— — 100
— — 35
— — 6.8 nC
— — 23
— — 60
—
—
—
—
140
140
ns
— — 140
—
— nH
— 790
— 340 — pF
— 71 —
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -10V, ID = -4.1A
VGS = -10V, ID = -6.5A
VDS = VGS, ID = -250µA
VDS = -15V, IDS = -4.1A
VDS = -80V, VGS= 0V
VDS = -80V
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS = -10V, ID = -6.5A
VDS = -50V
VDD = -50V, ID = -6.5A,
RG = 7.5Ω
Measured from the center of
drain pad to center of source
pad
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode) — — -6.5 A
ISM Pulse Source Current (Body Diode)
— — -25
Test Conditions
VSD Diode Forward Voltage
trr Reverse Recovery Time
QRR Reverse Recovery Charge
— — -4.3 V
Tj = 25°C, IS = -6.5A, VGS = 0V
— — 250 ns Tj = 25°C, IF = -6.5A, di/dt ≤-100A/µs
— — 3.0 µC
VDD ≤ -50V
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction to Case
Junction to PC Board
Min Typ Max Units
— — 5.0
— — 19 °C/W
Test Conditions
Soldered to a copper clad PC board
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com