LAN8720AI Ver la hoja de datos (PDF) - SMSC -> Microchip

Número de pieza

componentes Descripción

Lista de partido

LAN8720AI

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support

SMSC -> Microchip 

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support

Datasheet

2.2

Buffer Types

Table 2.9 Buffer Types

BUFFER TYPE

IS

O12

VIS

VO8

VOD8

PU

PD

AI

AIO

ICLK

OCLK

P

DESCRIPTION

Schmitt-triggered input

Output with 12mA sink and 12mA source

Variable voltage Schmitt-triggered input

Variable voltage output with 8mA sink and 8mA source

Variable voltage open-drain output with 8mA sink

50uA (typical) internal pull-up. Unless otherwise noted in the pin description, internal pull-

ups are always enabled.

Note:

Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on

internal resistors to drive signals external to the device. When connected to a load

that must be pulled high, an external resistor must be added.

50uA (typical) internal pull-down. Unless otherwise noted in the pin description, internal

pull-downs are always enabled.

Note:

Internal pull-down resistors prevent unconnected inputs from floating. Do not rely

on internal resistors to drive signals external to the device. When connected to a

load that must be pulled low, an external resistor must be added.

Analog input

Analog bi-directional

Crystal oscillator input pin

Crystal oscillator output pin

Power pin

Note: The digital signals are not 5V tolerant. Refer to Section 5.1, "Absolute Maximum Ratings*," on

page 63 for additional buffer information.

Note 2.3 Sink and source capabilities are dependant on the VDDIO voltage. Refer to Section 5.1,

"Absolute Maximum Ratings*," on page 63 for additional information.

Revision 1.4 (08-23-12)

16

DATASHEET

SMSC LAN8720A/LAN8720Ai

Share Link: