LPC2290 Ver la hoja de datos (PDF) - NXP Semiconductors.
Número de pieza
componentes Descripción
Lista de partido
LPC2290
NXP Semiconductors.
LPC2290 Datasheet PDF : 41 Pages
| |||
NXP Semiconductors
LPC2290
16/32-bit ARM microcontroller with external memory interface
Table 3. Pin description …continued
Symbol
Pin
Type
P0.9/RXD1/
76[2]
I/O
PWM6/EINT3
I
O
I
P0.10/RTS1/ 78[1]
I/O
CAP1.0
O
I
P0.11/CTS1/ 83[1]
I/O
CAP1.1
I
I
P0.12/DSR1/ 84[1]
I/O
MAT1.0
I
O
P0.13/DTR1/ 85[1]
I/O
MAT1.1
O
O
P0.14/DCD1/ 92[2]
I/O
EINT1
I
I
P0.15/RI1/
99[2]
I/O
EINT2
I
I
P0.16/EINT0/ 100[2]
I/O
MAT0.2/CAP0.2
I
O
I
P0.17/CAP1.2/ 101[1]
I/O
SCK1/MAT1.2
I
I/O
O
P0.18/CAP1.3/ 121[1]
I/O
MISO1/MAT1.3
I
I/O
O
Description
P0.9 — General purpose digital input/output pin.
RXD1 — Receiver input for UART1.
PWM6 — Pulse Width Modulator output 6.
EINT3 — External interrupt 3 input.
P0.10 — General purpose digital input/output pin.
RTS1 — Request to Send output for UART1.
CAP1.0 — Capture input for Timer 1, channel 0.
P0.11 — General purpose digital input/output pin.
CTS1 — Clear to Send input for UART1.
CAP1.1 — Capture input for Timer 1, channel 1.
P0.12 — General purpose digital input/output pin.
DSR1 — Data Set Ready input for UART1.
MAT1.0 — Match output for Timer 1, channel 0.
P0.13 — General purpose digital input/output pin.
DTR1 — Data Terminal Ready output for UART1.
MAT1.1 — Match output for Timer 1, channel 1.
P0.14 — General purpose digital input/output pin.
DCD1 — Data Carrier Detect input for UART1.
EINT1 — External interrupt 1 input.
Note: LOW on this pin while RESET is LOW forces on-chip bootloader to take
over control of the part after reset.
P0.15 — General purpose digital input/output pin.
RI1 — Ring Indicator input for UART1.
EINT2 — External interrupt 2 input.
P0.16 — General purpose digital input/output pin.
EINT0 — External interrupt 0 input.
MAT0.2 — Match output for Timer 0, channel 2.
CAP0.2 — Capture input for Timer 0, channel 2.
P0.17 — General purpose digital input/output pin.
CAP1.2 — Capture input for Timer 1, channel 2.
SCK1 — Serial Clock for SPI1/SSP. SPI clock output from master or input to
slave (SSP is available in LPC2290/01 only).
MAT1.2 — Match output for Timer 1, channel 2.
P0.18 — General purpose digital input/output pin.
CAP1.3 — Capture input for Timer 1, channel 3.
MISO1 — Master In Slave Out for SPI1/SSP. Data input to SPI master or data
output from SPI slave (SSP is available in LPC2290/01 only).
MAT1.3 — Match output for Timer 1, channel 3.
LPC2290_3
Product data sheet
Rev. 03 — 16 November 2006
© NXP B.V. 2006. All rights reserved.
6 of 41
Share Link: