MAX1694EUB Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Lista de partido
MAX1694EUB Datasheet PDF : 9 Pages
| |||
19-1518; Rev 2; 9/01
USB Current-Limited Switches
with Fault Blanking
General Description
The MAX1693/(MAX1693H)/MAX1694 are current-limit-
ed, 60mΩ switches with built-in fault blanking. Their
accurate preset current limit of 0.7A to 1.0A makes them
ideally suited for USB applications. Their low quiescent
supply current (14µA) and shutdown current (1µA) con-
serve battery power in portable applications. The
MAX1693/(MAX1693H)/MAX1694 operate with inputs
from 2.7V to 5.5V, making them ideal for both 3V and 5V
systems.
A fault signal notifies the microprocessor that the inter-
nal current limit has been reached. A 10ms fault-blank-
ing feature allows momentary faults (such as those
caused when hot-swapping into a capacitive load) to be
ignored, thus preventing false alarms to the host system.
This fault blanking also prevents a fault signal from
being issued when the device is powering up.
In the MAX1693/(MAX1693H), an output overcurrent
condition causes the switch to current limit at 0.7A to
1.0A and FAULT to go low after the 10ms blanking peri-
od. When the overcurrent condition is removed, FAULT
returns to its high-impedance state. In the MAX1694,
any overcurrent longer than 10ms will latch the switch
open and set FAULT low. The latch is cleared by cycling
the ON input or by powering up the device again. This
feature saves power by preventing the device from ther-
mally cycling on and off in case of a persistent short-cir-
cuit condition.
The MAX1693/(MAX1693H)/MAX1694 have several
safety features to ensure that the USB port is protected.
Built-in thermal-overload protection limits power dissi-
pation and junction temperatures. All devices have
accurate internal current-limiting circuitry to protect the
input supply against overload. They are available in
space-saving 10-pin µMAX packages.
Pin Configuration
TOP VIEW
IN 1
OUT 2
IN 3
OUT 4
(ON) ON 5
MAX1693
(MAX1693H)
MAX1694
10 OUT
9 IN
8 OUT
7 FAULT
6 GND
µMAX
Features
o Accurate Current Limit (0.7A min, 1.0A max)
o Guaranteed 0.75A Short-Circuit Protection
o 10ms Internal Fault-Blanking Timeout
o No Fault Signal During Power-Up
o Latched FAULT Output Turns Off Power Switch
(MAX1694)
o Thermal Shutdown Protection
o 2.7V to 5.5V Supply Range
o 14µA Supply Current
o Small 10-Pin µMAX Package
o UL Recognized–#E211935
Applications
USB Ports and Hubs
Notebook Computers
Portable Equipment
Docking Stations
Hot Plug-In Power Supplies
Battery-Charger Circuits
Ordering Information
PART
MAX1693EUB
MAX1693HEUB
MAX1694EUB
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
10 µMAX
10 µMAX
10 µMAX
Typical Operating Circuit
INPUT
2.7V TO 5.5V
(ON)
OFF
ON
(OFF)
IN
OUT
MAX1693
(MAX1693H)
MAX1694
FAULT
ON (ON)
GND
OUTPUT
_______________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Share Link: 