MAX2442EAI Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Lista de partido
MAX2442EAI Datasheet PDF : 12 Pages
| |||
900MHz Image-Reject Receivers
ABSOLUTE MAXIMUM RATINGS
VCC to GND ...........................................................-0.3V to +5.5V
Voltage on LNAGAIN, RXON, VCOON,
DIV1, MOD .............................................-0.3V to (VCC + 0.3V)
RXIN Input Power..............................................................10dBm
TANK, TANK Input Power ...................................................2dBm
Continuous Power Dissipation (TA = +70°C)
SSOP (derate 9.50mW/°C above +70°C) ....................762mW
Operating Temperature Range
MAX244_EAI ...................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +165°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION! ESD SENSITIVE DEVICE
DC ELECTRICAL CHARACTERISTICS
(VCC = +2.7V to +4.8V, no RF signals applied, LNAGAIN = unconnected, VVCOON = 2.4V, VRXON = VMOD = VDIV1 = 0.45V, PREGND
= GND, TA = TMIN to TMAX. Typical values are at TA = +25°C, VCC = +3.3V, unless otherwise noted.) (Note 1)
PARAMETER
Supply-Voltage Range
Oscillator Supply Current
Prescaler Supply Current
(divide-by-64/65 mode)
CONDITIONS
PREGND = unconnected
(Note 2)
MIN
TYP MAX UNITS
2.7
4.8
V
9.5
14
mA
4.2
6
mA
Prescaler Supply Current
(buffer mode)
Receive Supply Current
Shutdown Supply Current
Digital Input Voltage High
Digital Input Voltage Low
Digital Input Current
VDIV1 = 2.4V (Note 3)
VRXON = 2.4V, PREGND = unconnected (Note 4)
VCOON = RXON = MOD = TA = +25°C
DIV1 = GND
TA = TMIN to TMAX
RXON, DIV1, VCOON, MOD
RXON, DIV1, VCOON, MOD
Voltage on any one digital input = VCC or GND
5.4
8.5
mA
23
36
mA
0.5
µA
10
2.4
V
0.45
V
±1
±10
µA
Note 1: ≥25°C guaranteed by production test, <25°C guaranteed through correlation to worst-case temperature testing.
Note 2: Calculated by measuring the combined oscillator and prescaler supply current and subtracting the oscillator supply current.
Note 3: Calculated by measuring the combined oscillator and LO buffer supply current and subtracting the oscillator supply current.
Note 4: Calculated by measuring the combined receive and oscillator supply current and subtracting the oscillator supply current.
With LNAGAIN = GND, the supply current drops by 4.5mA.
2 _______________________________________________________________________________________
Share Link: 