MC-45V16AD642KS-A75 Ver la hoja de datos (PDF) - Elpida Memory, Inc

Número de pieza

componentes Descripción

Lista de partido

MC-45V16AD642KS-A75

16M-WORD BY 64-BIT VirtualChannel™ DYNAMIC RAM MODULE (SO DIMM)

Elpida Memory, Inc 

MC-45V16AD642KS

DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)

Parameter

Symbol

Test condition

Grade MIN. MAX. Unit Notes

Operating current (Prefetch

mode at one bank active)

Operating current (Restore

mode at one bank active)

Precharge standby current

in power down mode

Precharge standby current

in non power down mode

ICC1P

ICC1R

tRC ≥ tRC (MIN.)

Prefetch is executed one time during tRC.

tRC ≥ tRC (MIN.)

-A75

-A75

ICC2P CKE ≤ VIL (MAX.), tCK = 15 ns

ICC2PS CKE ≤ VIL (MAX.), tCK = ∞

ICC2N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),

Input signals are changed one time during 30 ns.

720 mA 1

720 mA 1

9.6 mA

9.6

160 mA

Active standby current in

power down mode

Active standby current in

non power down mode

Operating current

(Burst mode)

Auto Refresh current

Self refresh current

Input leakage current

Output leakage current

High level output voltage

Low level output voltage

ICC2NS CKE ≥ VIH (MIN.), tCK = ∞ , Input signals are stable.

80

ICC3P CKE ≤ VIL (MAX.), tCK = 15 ns

48 mA

ICC3PS CKE ≤ VIL (MAX.), tCK = ∞

48

ICC3N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),

240 mA

Input signals are changed one time during 30 ns.

ICC3NS CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.

160

ICC4 tCK ≥ tCK (MIN.), IO = 0 mA

-A75

420 mA 2

Background : precharge standby

ICC5

tRCF ≥ tRCF (MIN.)

-A75

1,040 mA 3

ICC6 CKE ≤ 0.2 V

-A75

16 mA

II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V

–8

+8

µA

IO (L) DOUT is disabled, VO = 0 to 3.6 V

–1.5 +1.5 µA

VOH IO = – 4.0 mA

2.4

V

VOL IO = + 4.0 mA

0.4

V

Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).

2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).

3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).

6

'DWD 6KHHW (1

Share Link: