MIC2026(2000) Ver la hoja de datos (PDF) - Micrel
Número de pieza
componentes Descripción
fabricante
MIC2026 Datasheet PDF : 16 Pages
| |||
MIC2026/2076
Micrel
MIC2026/2076
Dual-Channel Power Distribution Switch
Preliminary Information
General Description
The MIC2026 and MIC2076 are high-side MOSFET switches
optimized for general-purpose power distribution requiring
circuit protection.
The MIC2026/76 are internally current limited and have
thermal shutdown that protects the device and load.
The MIC2076 offers “smart” thermal shutdown that reduces
current consumption in fault modes. When a thermal shut-
down fault occurs, the output is latched off until the faulty load
is removed. Removing the load or toggling the enable input
will reset the device output.
Both devices employ soft-start circuitry that minimizes inrush
current in applications where highly capacitive loads are
employed.
A fault status output flag is asserted during overcurrent and
thermal shutdown conditions. Transient faults are internally
filtered.
The MIC2026/76 are available in 8-pin DIP or 8-lead SOP.
Features
• 140mΩ maximum on-resistance per channel
• 2.7V to 5.5V operating range
• 500mA minimum continuous current per channel
• Short-circuit protection with thermal shutdown
• Thermally isolated channels
• Fault status flag with 3ms filter
eliminates false assertions
• Undervoltage lockout
• Reverse current flow blocking (no “body diode”)
• Circuit breaker mode (MIC2076)
• Logic-compatible inputs
• Soft-start circuit
• Low quiescent current
Pin-compatible with MIC2526
Applications
• USB peripherals
• General purpose power switching
• ACPI power distribution
• Notebook PCs
• PDAs
• PC card hot swap
Typical Application
VCONT.
10k
10k
Logic Controller
VIN
ON/OFF
OVERCURRENT
OVERCURRENT
ON/OFF
VCC
2.7V to 5.5V
MIC2026-2
ENA
FLGA
FLGB
ENB
OUTA
IN
GND
OUTB
Load
0.1µF
Load
Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 944-0970 • http://www.micrel.com
March 2000
1
MIC2026/2076
Share Link: 