MK3725 Ver la hoja de datos (PDF) - Integrated Circuit Systems

Número de pieza

componentes Descripción

Lista de partido

MK3725

DUAL OUTPUT 3.3 VOLT VCXO

Integrated Circuit Systems 

MK3725

DUAL OUTPUT 3.3 VOLT VCXO

Trim sensitivity is a parameter which can be supplied by

your crystal vendor. If you do not know the value,

assume it is 30 ppm/pF. After any changes, repeat the

measurement to verify that the remaining error is

acceptably low (typically less than ±25 ppm).

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the MK3725. These ratings,

which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of

the device at these or any other conditions above those indicated in the operational sections of the

specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can

affect product reliability. Electrical parameters are guaranteed only over the recommended operating

temperature range.

Item

Supply Voltage, VDD

All Inputs and Outputs

Ambient Operating Temperature

Storage Temperature

Soldering Temperature

Rating

7V

-0.5 V to VDD+0.5 V

0 to +70°C

-65 to +150°C

260°C

Recommended Operation Conditions

Parameter

Ambient Operating Temperature

Power Supply Voltage (measured in respect to GND)

Reference crystal parameters

Min.

0

+3.15

Typ.

Max.

+70

+3.45

Refer to MAN05

Units

°C

V

MDS 3725 A

4

Revision 100803

Integrated Circuit Systems z 525 Race Street, San Jose, CA 95126 z tel (408) 297-1201 z www.icst.com

Share Link: