ML7022-01MB Ver la hoja de datos (PDF) - Oki Electric Industry

Número de pieza

componentes Descripción

Lista de partido

ML7022-01MB

Single Rail Dual Channel PCM CODEC

Oki Electric Industry 

1Semiconductor

FEDL7022-01-06

ML7022-01

RECOMMENDATIONS FOR ACTUAL DESIGN

• To assure specified electrical characteristics, use bypass capacitors with excellent high frequency characteristics

for the power supply and keep them as close as possible to the device pins.

• Connect the AG pin and DG pin each other as closely as possible. Connect to the system ground with low

impedance.

• Unless unavoidable, use short lead type socket.

• When mounted on a frame, use electromagnetic shielding, if any electromagnetic emission sources such as

power supply transformers surround the device.

• Keep the voltage on the VDD pin not lower than –0.3 V even instantaneously to avoid latch-up phenomenon when

turning the power on.

• Use a low noise power supply (having low level high frequency spike noise or pulse noise) to avoid erroneous

operation and the degradation of the characteristics of these device.

18/20

Share Link: