datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

MSM7584D Ver la hoja de datos (PDF) - Oki Electric Industry

Número de pieza
componentes Descripción
Lista de partido
MSM7584D
OKI
Oki Electric Industry OKI
MSM7584D Datasheet PDF : 58 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
¡ Semiconductor
FEDL7584D-02
MSM7584D
(Voice Recording Serial Controller)
DIO
Input/output pin that outputs write data and to input read data.
Connect this pin to the DIN pin, DOUT pin of the serial registers and the DOUT pin of the serial
voice ROM. If neither a serial register nor a serial voice ROM is connected, pull this pin up with
an approx. 10 kW resistor.
WE
Output that selects the read mode or write mode.
Connect this pin to the WE pin of the serial registers.
SAD
Read/write start address output.
Connect this pin to the SAD pin of the serial registers and the SADX pin of the serial voice ROM.
SAS
Output of clocks for writing serial address.
Connect this pin to the SAS pin of the serial registers and the SASX and SASY pins of the serial
voice ROM.
TAS
Strobe signal output that sets the serial address which is entered from the SAD pin, to the address
counter inside the serial register/serial voice ROM.
Connect this pin to the TAS pins of the serial registers and serial voice ROM.
RWCK
Output of clocks for reading data from or writing data to the serial registers.
Connect this pin to the RWCK pin of the serial registers and the PDCK pin of the serial voice ROM.
CS1, CS2
Chip select pins.
Connect CS1 to the CS pin of the serial registers.
Connect CS2 to the CS pin of the serial voice ROM.
10/58

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]